Hi Noralf, the patch series looks good, see comments in the patch emails. One question: is there a general mechanism to tell a driver not to use parallel RGB even though the display supports it and "port" is specified in the device-tree?
Josef po 29. 7. 2019 v 21:55 odesílatel Noralf Trønnes <nor...@tronnes.org> napsal: > > Inspired by the thread[1] following the submission of a new ili9341 > panel driver[2], I set out to see if I could support panel drivers in > drm_mipi_dbi. > > I have included the original driver, done some prep work on it, added > panel support to drm_mipi_dbi and converted mi0283qt to this new panel > driver. > > The big question is whether or not panel drivers should be allowed to > turn themselves into full fledged DRM drivers. > > Noralf. > > [1] > https://lists.freedesktop.org/archives/dri-devel/2019-July/228193.html > [2] https://patchwork.freedesktop.org/patch/316528/ > > Josef Lusticky (1): > drm/panel: Add Ilitek ILI9341 parallel RGB panel driver > > Noralf Trønnes (3): > drm/panel/ili9341: Rebase and some more > drm/mipi-dbi: Support command mode panel drivers > drm/panel/ili9341: Support mi0283qt > > MAINTAINERS | 6 + > drivers/gpu/drm/drm_mipi_dbi.c | 110 +++++ > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 452 +++++++++++++++++++ > include/drm/drm_mipi_dbi.h | 8 + > 6 files changed, 586 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c > > -- > 2.20.1 > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
