On 2019-08-05 15:41, Jerome Brunet wrote:
> Provide the eld to the generic hdmi-codec driver.
> This will let the driver enforce the maximum channel number and set the
> channel allocation depending on the hdmi sink.
>
> Cc: Jonas Karlman <jo...@kwiboo.se>
> Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 1 +
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 10 ++++++++++
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 +
> 3 files changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> index 63b5756f463b..cb07dc0da5a7 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> @@ -14,6 +14,7 @@ struct dw_hdmi_audio_data {
>
> struct dw_hdmi_i2s_audio_data {
> struct dw_hdmi *hdmi;
> + u8 *eld;
>
> void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
> u8 (*read)(struct dw_hdmi *hdmi, int offset);
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index b8ece9c1ba2c..14d499b344c0 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -121,6 +121,15 @@ static void dw_hdmi_i2s_audio_shutdown(struct device
> *dev, void *data)
> dw_hdmi_audio_disable(hdmi);
> }
>
> +static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
> + size_t len)
> +{
> + struct dw_hdmi_i2s_audio_data *audio = data;
> +
> + memcpy(buf, audio->eld, min(sizeof(audio->eld), len));
Above sizeof does not work as intended, sizeof(audio->eld) is probably the size
of a pointer and not MAX_ELD_BYTES (128),
resulting in only part of the ELD gets copied to buf.
Thanks for reworking dw-hdmi multi channel lpcm support!, this works on
Rockchip for most parts.
Without the [1] patch (reset cts+n after clock is enabled) audio sometime stay
silent when switching between e.g. 2ch 44.1khz and 6ch 48khz tracks.
It is not fully clear to me why reset cts+n helps, if that have negative
affects on other platforms or if there is another way to solve loosing audio.
I also have a small issue with the channel allocation being selected by
hdmi-codec, my soundbar reports LPCM 6.1ch instead of LPCM 7.1ch when I play a
7.1ch speaker test clip.
I have a hdmi-codec patch to fix selection of channel allocation in queue.
For patch 1-7:
Reviewed-by: Jonas Karlman <jo...@kwiboo.se>
[1]
https://github.com/Kwiboo/linux-rockchip/commit/c0839e874f843ad173ddde958303d6878394ef92
Regards,
Jonas
> + return 0;
> +}
> +
> static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> struct device_node *endpoint)
> {
> @@ -144,6 +153,7 @@ static int dw_hdmi_i2s_get_dai_id(struct
> snd_soc_component *component,
> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> .hw_params = dw_hdmi_i2s_hw_params,
> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> + .get_eld = dw_hdmi_i2s_get_eld,
> .get_dai_id = dw_hdmi_i2s_get_dai_id,
> };
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index bed4bb017afd..8df69c9dbfad 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2797,6 +2797,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
> struct dw_hdmi_i2s_audio_data audio;
>
> audio.hdmi = hdmi;
> + audio.eld = hdmi->connector.eld;
> audio.write = hdmi_writeb;
> audio.read = hdmi_readb;
> hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
