On Fri, Aug 16, 2019 at 09:47:54PM +0200, Uwe Kleine-König wrote:
> On Fri, Aug 16, 2019 at 10:51:57AM -0700, Matthias Kaehlcke wrote:
> > Hi Uwe,
> > 
> > On Fri, Aug 16, 2019 at 06:51:48PM +0200, Uwe Kleine-König wrote:
> > > On Tue, Jul 09, 2019 at 12:00:05PM -0700, Matthias Kaehlcke wrote:
> > > > Backlight brightness curves can have different shapes. The two main
> > > > types are linear and non-linear curves. The human eye doesn't
> > > > perceive linearly increasing/decreasing brightness as linear (see
> > > > also 88ba95bedb79 "backlight: pwm_bl: Compute brightness of LED
> > > > linearly to human eye"), hence many backlights use non-linear (often
> > > > logarithmic) brightness curves. The type of curve currently is opaque
> > > > to userspace, so userspace often uses more or less reliable heuristics
> > > > (like the number of brightness levels) to decide whether to treat a
> > > > backlight device as linear or non-linear.
> > > > 
> > > > Export the type of the brightness curve via the new sysfs attribute
> > > > 'scale'. The value of the attribute can be 'linear', 'non-linear' or
> > > > 'unknown'. For devices that don't provide information about the scale
> > > > of their brightness curve the value of the 'scale' attribute is 
> > > > 'unknown'.
> > > > 
> > > > Signed-off-by: Matthias Kaehlcke <m...@chromium.org>
> > > 
> > > I wonder what kind of problem you are solving here. Can you describe
> > > that in a few words?
> > 
> > The human eye perceives brightness in a logarithmic manner. For
> > backlights with a linear brightness curve brightness controls like
> > sliders need to use a mapping to achieve a behavior that is perceived
> > as linear-ish (more details: 
> > http://www.pathwaylighting.com/products/downloads/brochure/technical_materials_1466797044_Linear+vs+Logarithmic+Dimming+White+Paper.pdf)
> > 
> > As of now userspace doesn't have information about the type of the
> > brightness curve, and often uses heuristics to make a guess, which may
> > be right most of the time, but not always. The new attribute eliminates
> > the need to guess.
> 
> This is about backlights right? So the kernel provides to userspace an
> interval [0, x] for some x and depending on the physics of the the
> backlight configuring x/2 (probably?) either means 50% measured light or
> 50% perceived light, right?

correct

> I wonder if it would be possible instead of giving different backlight
> implementations the freedom to use either linear or logarithmic (or
> quadratic?) scaling and tell userspace which of the options were picked
> require the drivers to provide a (say) linear scaling and then userspace
> wouldn't need to care about the exact physics.

In an ideal world the backlight interface would be consistent as you
suggest, however there are plenty of existing devices which use the
'other' scaling (regardless of which is chosen as the 'correct'
one). Userspace still has to deal with these. And changing previously
'logarithmic' drivers to linear (or viceversa) may 'break' userspace,
when it keeps using its 'old' scaling, which now isn't correct anymore.


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to