In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.
On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang <cychi...@chromium.org>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 5cbb71a866d5..08b4adbb1ddc 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void
*data,
hdmi_write(audio, conf0, HDMI_AUD_CONF0);
hdmi_write(audio, conf1, HDMI_AUD_CONF1);
+ return 0;
+}
+
+static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
+{
+ struct dw_hdmi_i2s_audio_data *audio = data;
+ struct dw_hdmi *hdmi = audio->hdmi;
+
dw_hdmi_audio_enable(hdmi);
return 0;
@@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component
*component,
}
static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
+ .audio_startup = dw_hdmi_i2s_audio_startup,
.hw_params = dw_hdmi_i2s_hw_params,
.audio_shutdown = dw_hdmi_i2s_audio_shutdown,
.get_dai_id = dw_hdmi_i2s_get_dai_id,
--
2.23.0.187.g17f5b7556c-goog
