Hi Tomi,
Thank you for the path.
On Mon, Sep 02, 2019 at 03:53:54PM +0300, Tomi Valkeinen wrote:
> From: Alejandro Hernandez <ajhernan...@ti.com>
>
> A "HDMI I2C Master Error" is sometimes reported with the current DDC SCL
> timings. The current settings for a 10us SCL period (100 KHz) causes the
> error with some displays. This patch increases the SCL signal period
> from 10us to 10.2us, with the new settings the error is not observed
>
It would be useful to document what those "some displays" are if you
can.
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Signed-off-by: Alejandro Hernandez <ajhernan...@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> ---
> drivers/gpu/drm/omapdrm/dss/hdmi5_core.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
> b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
> index 7400fb99d453..4c588ec7634a 100644
> --- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
> +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
> @@ -39,8 +39,8 @@ static void hdmi_core_ddc_init(struct hdmi_core_data *core)
> {
> void __iomem *base = core->base;
> const unsigned long long iclk = 266000000; /* DSS L3 ICLK */
> - const unsigned int ss_scl_high = 4600; /* ns */
> - const unsigned int ss_scl_low = 5400; /* ns */
> + const unsigned int ss_scl_high = 4700; /* ns */
> + const unsigned int ss_scl_low = 5500; /* ns */
> const unsigned int fs_scl_high = 600; /* ns */
> const unsigned int fs_scl_low = 1300; /* ns */
> const unsigned int sda_hold = 1000; /* ns */
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
