On Wed, Nov 6, 2019 at 6:01 PM Stephan Gerhold <step...@gerhold.net> wrote:
> This is a collection of fixes to make DSI video mode work better > using the MCDE driver. With these changes, MCDE appears to work > properly for the video mode panel I have been testing with. > > Note: The patch that fixes the DSI link register setup for > video mode [1] is still necessary; but we still need to finish it > and actually make it initialize a panel correctly. > > This series contains only patches for the other parts in MCDE. > I have tested it by disabling most of the register setup in the > DSI driver, which makes it re-use the properly working DSI register > set by the bootloader. > > [1]: https://lists.freedesktop.org/archives/dri-devel/2019-October/238175.html > > Stephan Gerhold (7): > drm/mcde: Provide vblank handling unconditionally > drm/mcde: Fix frame sync setup for video mode panels > drm/mcde: dsi: Make video mode errors more verbose > drm/mcde: dsi: Delay start of video stream generator > drm/mcde: dsi: Fix duplicated DSI connector > drm/mcde: dsi: Enable clocks in pre_enable() instead of mode_set() > drm/mcde: Handle pending vblank while disabling display Tested all 7 on the Ux500 HREFv60plus with the command mode panel without problems. Tested-by: Linus Walleij <linus.wall...@linaro.org> I will apply and push to DRM misc for-next with my Tested-by tag. Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
