On 17/11/2019 04:39, Sebastian Reichel wrote:
The standard binding for DSI requires, that the channel number
of the panel is encoded in DT. This adds the channel number in
all OMAP3-5 boards, in preparation for using common infrastructure.
Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com>
---
.../devicetree/bindings/display/panel/panel-dsi-cm.txt | 4 +++-
arch/arm/boot/dts/omap3-n950.dts | 3 ++-
arch/arm/boot/dts/omap3.dtsi | 3 +++
arch/arm/boot/dts/omap4-droid4-xt894.dts | 3 ++-
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++--
arch/arm/boot/dts/omap4.dtsi | 6 ++++++
arch/arm/boot/dts/omap5.dtsi | 6 ++++++
7 files changed, 26 insertions(+), 5 deletions(-)
Is this required only in the .txt, or also by the driver? This does
break backward compatibility with the dtbs, and there's always someone
who won't like it.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
