Hi Claudiu.
On Tue, Dec 10, 2019 at 03:24:44PM +0200, Claudiu Beznea wrote:
> Changing pixel clock source without having this clock source enabled
> will block the timing engine and the next operations after (in this case
> setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
> will fail). It is recomended (although in datasheet this is not present)
> to actually enabled pixel clock source before doing any changes on timing
> enginge (only SAM9X60 datasheet specifies that the peripheral clock and
> pixel clock must be enabled before using LCD controller).
>
> Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
We already had a remotely similar fix.
See 262d67e73f9a920a20bd75278761400404a82de0
("drm: atmel-hlcdc: enable sys_clk during initalization.")
In this patch sys_clk is only enabled if we have a fixed_clk.
Maybe we should do this unconditionally in
atmel_hlcdc_dc_load()?
Then we do not need this enable(disable in the mode_set_nofb
implementation.
Have you considered this way to fix it?
Sam
> ---
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 5040ed8d0871..721fa88bf71d 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -73,7 +73,11 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc
> *c)
> unsigned long prate;
> unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
> unsigned int cfg = 0;
> - int div;
> + int div, ret;
> +
> + ret = clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
> + if (ret)
> + return;
>
> vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay;
> vm.vback_porch = adj->crtc_vtotal - adj->crtc_vsync_end;
> @@ -147,6 +151,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct
> drm_crtc *c)
> ATMEL_HLCDC_VSPSU | ATMEL_HLCDC_VSPHO |
> ATMEL_HLCDC_GUARDTIME_MASK | ATMEL_HLCDC_MODE_MASK,
> cfg);
> +
> + clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
> }
>
> static enum drm_mode_status
> --
> 2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
