The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
dosen't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
drivers/gpu/drm/sun4i/sun6i_drc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_drc.c
b/drivers/gpu/drm/sun4i/sun6i_drc.c
index f7ab72244796..ddb52da90103 100644
--- a/drivers/gpu/drm/sun4i/sun6i_drc.c
+++ b/drivers/gpu/drm/sun4i/sun6i_drc.c
@@ -57,6 +57,7 @@ static int sun6i_drc_bind(struct device *dev, struct device
*master,
goto err_disable_bus_clk;
}
clk_prepare_enable(drc->mod_clk);
+ clk_set_rate_exclusive(drc->mod_clk, 300000000);
return 0;
@@ -72,6 +73,7 @@ static void sun6i_drc_unbind(struct device *dev, struct
device *master,
{
struct sun6i_drc *drc = dev_get_drvdata(dev);
+ clk_rate_exclusive_put(drc->mod_clk);
clk_disable_unprepare(drc->mod_clk);
clk_disable_unprepare(drc->bus_clk);
reset_control_assert(drc->reset);
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
