Hi Thierry,
On 02/12/2019 15:07, Laurent Pinchart wrote:
Hi Tomi,
Thank you for the patch.
On Thu, Nov 14, 2019 at 11:39:50AM +0200, Tomi Valkeinen wrote:
The panel datasheet says that the panel samples at falling edge, but
does not say anything about h/v sync signals. Testing shows that if the
sync signals are driven on falling edge, the picture on the panel will
be slightly shifted right.
Setting sync drive edge to the same as data drive edge fixes this issue.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
I don't have access to the documentation, but this makes sense, so
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
drivers/gpu/drm/panel/panel-simple.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 5d487686d25c..0784536ae6af 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2397,7 +2397,8 @@ static const struct panel_desc
osddisplays_osd070t1718_19ts = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
+ DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
Can you pick this one up?
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
