Hi Marek.
Thanks for the patch.
On Mon, Jan 27, 2020 at 03:20:57AM +0100, Marek Vasut wrote:
> From: Sean Cross <x...@kosagi.com>
>
> The Innolux N133HSE panel is a 13.3" 1920x1080 panel that contains an
> integrated backlight, and connects via eDP.
>
> It is used in the Kosagi Novena.
>
> Signed-off-by: Sean Cross <x...@kosagi.com>
> Cc: Shawn Guo <shawn...@kernel.org>
> Cc: Fabio Estevam <fabio.este...@freescale.com>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> To: dri-devel@lists.freedesktop.org
> ---
> .../display/panel/innolux,n133hse-ea1.txt | 7 +++++
> drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++++++++
> 2 files changed, 33 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/innolux,n133hse-ea1.txt
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/innolux,n133hse-ea1.txt
> b/Documentation/devicetree/bindings/display/panel/innolux,n133hse-ea1.txt
> new file mode 100644
> index 000000000000..1a886aeedabf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,n133hse-ea1.txt
> @@ -0,0 +1,7 @@
> +Innolux Corporation 13.3" FHD (1920x1080) TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,n133hse-ea1"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
For simple panels like this add the compatible to the new file
pnale-simple.yaml.
We no longer use individual files for each panel.
You may need to use drm-misc-next to provide a proper patch.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index e14c14ac62b5..3dffd2e5af6d 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1793,6 +1793,29 @@ static const struct panel_desc innolux_n116bge = {
> },
> };
>
> +static const struct drm_display_mode innolux_n133hse_ea1_mode = {
> + .clock = 138500,
> + .hdisplay = 1920,
> + .hsync_start = 1920 + 46,
> + .hsync_end = 1920 + 46 + 30,
> + .htotal = 1920 + 46 + 30 + 84,
> + .vdisplay = 1080,
> + .vsync_start = 1080 + 2,
> + .vsync_end = 1080 + 2 + 4,
> + .vtotal = 1080 + 2 + 4 + 26,
> + .vrefresh = 60,
> +};
> +
> +static const struct panel_desc innolux_n133hse_ea1 = {
> + .modes = &innolux_n133hse_ea1_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 293,
> + .height = 165,
> + },
> +};
> +
As a minimum specify connector_type.
With eDP I assume you do not have min,typ,max figures for timings.
But if you have min.typ,max then please use a display_timings structure
and not a display_mode.
And please consider the .bus_format, .bus_flags and .flags.
We want the data in this file as precise as we can.
Sam
> static const struct drm_display_mode innolux_n156bge_l21_mode = {
> .clock = 69300,
> .hdisplay = 1366,
> @@ -3348,6 +3371,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "innolux,n116bge",
> .data = &innolux_n116bge,
> + }, {
> + .compatible = "innolux,n133hse-ea1",
> + .data = &innolux_n133hse_ea1,
> }, {
> .compatible = "innolux,n156bge-l21",
> .data = &innolux_n156bge_l21,
> --
> 2.24.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
