This patch prepares the driver for a overall 'make drm/imx drm_mode_config_cleanup() aware' patch to avoid race conditions like [1]. The patch also improves the driver memory usage by allocating only the necessary number of 'struct imx_ldb_channel'.
To make the driver drm_mode_config_cleanup() aware we need to split the driver state 'struct imx_ldb'. All the hardware settings like clocks and the regmap can be allocated during the driver probe() and so the devres context is moved to the probe/remove. Now upon a component.bind() call only the necessary number of channels are allocated. The difference is that now the 'struct imx_ldb_channel' memory is allocated within the bind/unbind devres context. So now the 'struct imx_ldb' driver state is still available after a component.unbind() call. [1] https://www.spinics.net/lists/dri-devel/msg189388.html Signed-off-by: Marco Felsch <m.fel...@pengutronix.de> --- drivers/gpu/drm/imx/imx-ldb.c | 187 ++++++++++++++++++---------------- 1 file changed, 98 insertions(+), 89 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 87bf659990da..e3fa46e1639d 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -87,7 +87,6 @@ struct bus_mux { struct imx_ldb { struct regmap *regmap; struct device *dev; - struct imx_ldb_channel channel[2]; struct clk *clk[2]; /* our own clock */ struct clk *clk_sel[4]; /* parent of display clock */ struct clk *clk_parent[4]; /* original parent of clk_sel */ @@ -212,14 +211,14 @@ static void imx_ldb_encoder_enable(struct drm_encoder *encoder) clk_set_parent(ldb->clk_sel[mux], ldb->clk[imx_ldb_ch->chno]); } - if (imx_ldb_ch == &ldb->channel[0] || dual) { + if (imx_ldb_ch->chno == 0 || dual) { ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; if (mux == 0 || ldb->lvds_mux) ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI0; else if (mux == 1) ldb->ldb_ctrl |= LDB_CH0_MODE_EN_TO_DI1; } - if (imx_ldb_ch == &ldb->channel[1] || dual) { + if (imx_ldb_ch->chno == 1 || dual) { ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; if (mux == 1 || ldb->lvds_mux) ldb->ldb_ctrl |= LDB_CH1_MODE_EN_TO_DI1; @@ -230,9 +229,9 @@ static void imx_ldb_encoder_enable(struct drm_encoder *encoder) if (ldb->lvds_mux) { const struct bus_mux *lvds_mux = NULL; - if (imx_ldb_ch == &ldb->channel[0]) + if (imx_ldb_ch->chno == 0) lvds_mux = &ldb->lvds_mux[0]; - else if (imx_ldb_ch == &ldb->channel[1]) + else if (imx_ldb_ch->chno == 1) lvds_mux = &ldb->lvds_mux[1]; regmap_update_bits(ldb->regmap, lvds_mux->reg, lvds_mux->mask, @@ -278,13 +277,13 @@ imx_ldb_encoder_atomic_mode_set(struct drm_encoder *encoder, } /* FIXME - assumes straight connections DI0 --> CH0, DI1 --> CH1 */ - if (imx_ldb_ch == &ldb->channel[0] || dual) { + if (imx_ldb_ch->chno == 0 || dual) { if (mode->flags & DRM_MODE_FLAG_NVSYNC) ldb->ldb_ctrl |= LDB_DI0_VS_POL_ACT_LOW; else if (mode->flags & DRM_MODE_FLAG_PVSYNC) ldb->ldb_ctrl &= ~LDB_DI0_VS_POL_ACT_LOW; } - if (imx_ldb_ch == &ldb->channel[1] || dual) { + if (imx_ldb_ch->chno == 1 || dual) { if (mode->flags & DRM_MODE_FLAG_NVSYNC) ldb->ldb_ctrl |= LDB_DI1_VS_POL_ACT_LOW; else if (mode->flags & DRM_MODE_FLAG_PVSYNC) @@ -309,9 +308,9 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder) drm_panel_disable(imx_ldb_ch->panel); - if (imx_ldb_ch == &ldb->channel[0]) + if (imx_ldb_ch->chno == 0) ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK; - else if (imx_ldb_ch == &ldb->channel[1]) + else if (imx_ldb_ch->chno == 1) ldb->ldb_ctrl &= ~LDB_CH1_MODE_EN_MASK; regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl); @@ -324,16 +323,16 @@ static void imx_ldb_encoder_disable(struct drm_encoder *encoder) if (ldb->lvds_mux) { const struct bus_mux *lvds_mux = NULL; - if (imx_ldb_ch == &ldb->channel[0]) + if (imx_ldb_ch->chno == 0) lvds_mux = &ldb->lvds_mux[0]; - else if (imx_ldb_ch == &ldb->channel[1]) + else if (imx_ldb_ch->chno == 1) lvds_mux = &ldb->lvds_mux[1]; regmap_read(ldb->regmap, lvds_mux->reg, &mux); mux &= lvds_mux->mask; mux >>= lvds_mux->shift; } else { - mux = (imx_ldb_ch == &ldb->channel[0]) ? 0 : 1; + mux = imx_ldb_ch->chno; } /* set display clock mux back to original input clock */ @@ -513,31 +512,6 @@ static u32 of_get_bus_format(struct device *dev, struct device_node *np) return -ENOENT; } -static struct bus_mux imx6q_lvds_mux[2] = { - { - .reg = IOMUXC_GPR3, - .shift = 6, - .mask = IMX6Q_GPR3_LVDS0_MUX_CTL_MASK, - }, { - .reg = IOMUXC_GPR3, - .shift = 8, - .mask = IMX6Q_GPR3_LVDS1_MUX_CTL_MASK, - } -}; - -/* - * For a device declaring compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb", - * of_match_device will walk through this list and take the first entry - * matching any of its compatible values. Therefore, the more generic - * entries (in this case fsl,imx53-ldb) need to be ordered last. - */ -static const struct of_device_id imx_ldb_dt_ids[] = { - { .compatible = "fsl,imx6q-ldb", .data = imx6q_lvds_mux, }, - { .compatible = "fsl,imx53-ldb", .data = NULL, }, - { } -}; -MODULE_DEVICE_TABLE(of, imx_ldb_dt_ids); - static int imx_ldb_panel_ddc(struct device *dev, struct imx_ldb_channel *channel, struct device_node *child) { @@ -582,59 +556,12 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) { struct drm_device *drm = data; struct device_node *np = dev->of_node; - const struct of_device_id *of_id = - of_match_device(imx_ldb_dt_ids, dev); + struct imx_ldb *imx_ldb = dev_get_drvdata(dev); + int dual = imx_ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; struct device_node *child; - struct imx_ldb *imx_ldb; - int dual; int ret; int i; - imx_ldb = devm_kzalloc(dev, sizeof(*imx_ldb), GFP_KERNEL); - if (!imx_ldb) - return -ENOMEM; - - imx_ldb->regmap = syscon_regmap_lookup_by_phandle(np, "gpr"); - if (IS_ERR(imx_ldb->regmap)) { - dev_err(dev, "failed to get parent regmap\n"); - return PTR_ERR(imx_ldb->regmap); - } - - /* disable LDB by resetting the control register to POR default */ - regmap_write(imx_ldb->regmap, IOMUXC_GPR2, 0); - - imx_ldb->dev = dev; - - if (of_id) - imx_ldb->lvds_mux = of_id->data; - - dual = of_property_read_bool(np, "fsl,dual-channel"); - if (dual) - imx_ldb->ldb_ctrl |= LDB_SPLIT_MODE_EN; - - /* - * There are three different possible clock mux configurations: - * i.MX53: ipu1_di0_sel, ipu1_di1_sel - * i.MX6q: ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel, ipu2_di1_sel - * i.MX6dl: ipu1_di0_sel, ipu1_di1_sel, lcdif_sel - * Map them all to di0_sel...di3_sel. - */ - for (i = 0; i < 4; i++) { - char clkname[16]; - - sprintf(clkname, "di%d_sel", i); - imx_ldb->clk_sel[i] = devm_clk_get(imx_ldb->dev, clkname); - if (IS_ERR(imx_ldb->clk_sel[i])) { - ret = PTR_ERR(imx_ldb->clk_sel[i]); - imx_ldb->clk_sel[i] = NULL; - break; - } - - imx_ldb->clk_parent[i] = clk_get_parent(imx_ldb->clk_sel[i]); - } - if (i == 0) - return ret; - for_each_child_of_node(np, child) { struct imx_ldb_channel *channel; int bus_format; @@ -653,7 +580,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) continue; } - channel = &imx_ldb->channel[i]; + channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL); + if (!channel) + return -ENOMEM; + channel->ldb = imx_ldb; channel->chno = i; @@ -700,8 +630,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) } } - dev_set_drvdata(dev, imx_ldb); - return 0; free_child: @@ -713,8 +641,89 @@ static const struct component_ops imx_ldb_ops = { .bind = imx_ldb_bind, }; +static struct bus_mux imx6q_lvds_mux[2] = { + { + .reg = IOMUXC_GPR3, + .shift = 6, + .mask = IMX6Q_GPR3_LVDS0_MUX_CTL_MASK, + }, { + .reg = IOMUXC_GPR3, + .shift = 8, + .mask = IMX6Q_GPR3_LVDS1_MUX_CTL_MASK, + } +}; + +/* + * For a device declaring compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb", + * of_match_device will walk through this list and take the first entry + * matching any of its compatible values. Therefore, the more generic + * entries (in this case fsl,imx53-ldb) need to be ordered last. + */ +static const struct of_device_id imx_ldb_dt_ids[] = { + { .compatible = "fsl,imx6q-ldb", .data = imx6q_lvds_mux, }, + { .compatible = "fsl,imx53-ldb", .data = NULL, }, + { } +}; +MODULE_DEVICE_TABLE(of, imx_ldb_dt_ids); + static int imx_ldb_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + const struct of_device_id *of_id = + of_match_device(imx_ldb_dt_ids, dev); + struct device_node *np = dev->of_node; + struct imx_ldb *imx_ldb; + int dual; + int ret; + int i; + + imx_ldb = devm_kzalloc(dev, sizeof(*imx_ldb), GFP_KERNEL); + if (!imx_ldb) + return -ENOMEM; + + imx_ldb->regmap = syscon_regmap_lookup_by_phandle(np, "gpr"); + if (IS_ERR(imx_ldb->regmap)) { + dev_err(dev, "failed to get parent regmap\n"); + return PTR_ERR(imx_ldb->regmap); + } + + /* disable LDB by resetting the control register to POR default */ + regmap_write(imx_ldb->regmap, IOMUXC_GPR2, 0); + + imx_ldb->dev = dev; + + if (of_id) + imx_ldb->lvds_mux = of_id->data; + + dual = of_property_read_bool(np, "fsl,dual-channel"); + if (dual) + imx_ldb->ldb_ctrl |= LDB_SPLIT_MODE_EN; + + /* + * There are three different possible clock mux configurations: + * i.MX53: ipu1_di0_sel, ipu1_di1_sel + * i.MX6q: ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel, ipu2_di1_sel + * i.MX6dl: ipu1_di0_sel, ipu1_di1_sel, lcdif_sel + * Map them all to di0_sel...di3_sel. + */ + for (i = 0; i < 4; i++) { + char clkname[16]; + + sprintf(clkname, "di%d_sel", i); + imx_ldb->clk_sel[i] = devm_clk_get(imx_ldb->dev, clkname); + if (IS_ERR(imx_ldb->clk_sel[i])) { + ret = PTR_ERR(imx_ldb->clk_sel[i]); + imx_ldb->clk_sel[i] = NULL; + break; + } + + imx_ldb->clk_parent[i] = clk_get_parent(imx_ldb->clk_sel[i]); + } + if (i == 0) + return ret; + + dev_set_drvdata(dev, imx_ldb); + return component_add(&pdev->dev, &imx_ldb_ops); } -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
