Hi Maxime, On Wed, 2020-02-26 at 16:01 +0100, Maxime Ripard wrote:
[...] > This was actually a shameless bait to start that discussion, so I'm > glad it worked ;) :) [...] > > - Some of those fw managed clocks you're creating have their mmio > > counterpart > > being registered by clk-bcm238. IMO either register one or the other, > > giving > > precedence to the mmio counterpart. Note that for pllb, we deleted the > > relevant code from clk-bcm2385. > > Indeed, and it's really that part of the discussion I wanted to > start. For some reason, it looks like a good chunk of those clocks are > non-functional at the moment (they all report 0). Yes, although they should be alright. I think it's just a matter of passing the right flags to the clk framework (disable caching and so on), but never found the time to investigate further. > If we're going to > use the firmware clocks as I did here, we'd have to modify most of the > device clocks used so far (UART, especially) to derive from the core > clock. I wasn't really sure of the implications though, since it's my first > experience with the RPi clock tree. That's something I'm confused about. I played around with your code and the HSM clock changes seem to be completely unrelated to the VPU clock. Actually it seems it's derived from 'plld_per' (here Florian can maybe contradict me). I found out by feeding the mmio HSM clock to your driver, which actually seemed to work (albeit maybe just out of luck since the FW already set up everything). Bare in mind, we disable turbo mode upstream so as for the firmware not to change the VPU frequencies on par with CPU changes (controlled by a special bit in the CPU clock mailbox property). So, if I'm not wrong, this simplifies things. As we don't have to worry about re-clocking all peripherals with every resolution change. This even opens up another question. Which clocks is the firmware interface monitoring for DVFS? If it's just the VPU and CPU we could be over-complicating things here, and MMIO clks could be an option, isn't it? On the subject of re-clocking, I had a word with the clk maintainers on how to properly implement it, see the two last paragraphs here if curious: https://www.spinics.net/lists/linux-clk/msg36937.html > > - The same way we were able to map the fw CPU clock into the clk tree > > (pllb/pllb_arm) there are no reasons we shouldn't be able to do the same > > for > > the VPU clocks. It's way nicer and less opaque to users (this being a > > learning platform adds to the argument). > > This would make the Linux clock tree match the one in hardware, which > would indeed be more readable to a beginner, but I see three main > drawbacks with this: > > - The parent / child relationship is already encoded in the firmware > discovery mechanism. It's not used yet by the driver, because the > firmware reports all of them as root clocks, but that's pretty > easy to fix. Had a look at this, they all return root as their parent. Which is somewhat true from the fw interface perspective (only leaves are represented), but not too endearing. > - It would make the code far more complicated and confusing than it > could, especially to beginners. And as far as I know, only the RPi > is doing that, while pretty much all the other platforms either > have the clock tree entirely defined, or rely on the firmware, but > don't have an hybrid. So they would learn something that cannot > really be applied to anywhere else. Fair enough. Still, for now, I think I prefer a hybrid clk tree approach. > - I have no idea what the clock tree is supposed to look like :) I don't have access to the official clock tree either. The closest we have is whatever the mmio clk driver exposes. > > - On top of that, having a special case for the CPU clock registration is > > nasty. Lets settle for one solution and make everyone follow it. > > It seemed to me that the CPU clock had a factor between the actual CPU > frequency and its clock? If not, then yeah we should definitely get > rid of it. Yes, IIRC, there is a factor because the CPU clock firmware interface actually controls the underlying PLL frequency which is then divided by 2 before reaching the CPU. Which kind of breaks the FW interface design if you ask me (alongside this turbo mode thing). > > - I don't see what's so bad about creating clock lookups. IIUC there are > > only > > two clocks that need this special handling CPU & HDMI, It's manageable. > > You > > don't even have to mess with the consumer driver, if there was ever to be > > a > > dt provided mmio option to this clock. > > V3D needs one too, and I might have missed a bunch of them in that > series given how the current debugging of the remaining issues turn > out to be. Would be nice to see if V3D is also affected by DVFS, and the rest of clocks for that matter. > And clk_lookups are local to devices, so you need to factor that by the > number of devices you have. Sure, it works, but it feels to me like that's > going to be an issue pretty fast, especially with the lookups on the way out? I see your point, TBH I don't mind moving it into the device-tree if things are going to get nasty. > > > drivers/clk/bcm/clk-raspberrypi.c | 11 ++++++++--- > > > 1 file changed, 8 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk- > > > raspberrypi.c > > > index 1654fd0eedc9..94870234824c 100644 > > > --- a/drivers/clk/bcm/clk-raspberrypi.c > > > +++ b/drivers/clk/bcm/clk-raspberrypi.c > > > @@ -255,15 +255,13 @@ static int raspberrypi_clk_probe(struct > > > platform_device > > > *pdev) > > > struct raspberrypi_clk *rpi; > > > int ret; > > > > > > - firmware_node = of_find_compatible_node(NULL, NULL, > > > - "raspberrypi,bcm2835-firmware"); > > > + firmware_node = of_parse_phandle(dev->of_node, "raspberrypi,firmware", > > > 0); > > > > There is no such phandle in the upstream device tree. Maybe this was aimed > > at > > the downstream dt? > > raspberrypi,firmware is the property, it points to the /soc/firmware > node that is defined in bcm2835-rpi.dtsi Yes, my bad. On that topic, I kind of like Robh's suggestion of making this driver a child of the firmware node (see an example in input/touchscreen/raspberrypi-ts.c). Regards, Nicolas
signature.asc
Description: This is a digitally signed message part
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
