It's next to impossible for us to do connector probing on topologies
without occasionally racing with userspace, since creating a connector
itself causes a hotplug event which we have to send before probing the
available PBN of a connector. Even if we didn't have this hotplug event
sent, there's still always a chance that userspace started probing
connectors before we finished probing the topology.
This can be a problem when validating a new MST state since the
connector will be shown as connected briefly, but without any available
PBN - causing any atomic state which would enable said connector to fail
with -ENOSPC. So, let's simply workaround this by telling userspace new
MST connectors are disconnected until we've finished probing their PBN.
Since we always send a hotplug event at the end of the link address
probing process, userspace will still know to reprobe the connector when
we're ready.
Signed-off-by: Lyude Paul <ly...@redhat.com>
Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic
check")
Cc: Mikita Lipski <mikita.lip...@amd.com>
Cc: Alex Deucher <alexander.deuc...@amd.com>
Cc: Sean Paul <seanp...@google.com>
Cc: Hans de Goede <hdego...@redhat.com>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
b/drivers/gpu/drm/drm_dp_mst_topology.c
index 207eef08d12c..7b0ff0cff954 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -4033,6 +4033,19 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
ret = connector_status_connected;
break;
}
+
+ /* We don't want to tell userspace the port is actually plugged into
+ * anything until we've finished probing it's available_pbn, otherwise
+ * userspace will see racy atomic check failures
+ *
+ * Since we always send a hotplug at the end of probing topology
+ * state, we can just let userspace reprobe this connector later.
+ */
+ if (ret == connector_status_connected && !port->available_pbn) {
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] not ready yet (PBN not
probed)\n",
+ connector->base.id, connector->name);
+ ret = connector_status_disconnected;
+ }
out:
drm_dp_mst_topology_put_port(port);
return ret;
--
2.24.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
