[PATCH 06/21] drm: mxsfb: Pass mxsfb_drm_private pointer to mxsfb_reset_block()

[Laurent Pinchart]

The mxsfb_reset_block() function isn't special, pass it the
mxsfb_drm_private pointer instead of a pointer to the base address.

Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c 
b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 8b6339316929..be60c4021e2f 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -166,21 +166,21 @@ static int clear_poll_bit(void __iomem *addr, u32 mask)
        return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT);
 }
 
-static int mxsfb_reset_block(void __iomem *reset_addr)
+static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb)
 {
        int ret;
 
-       ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+       ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
        if (ret)
                return ret;
 
-       writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
+       writel(MODULE_CLKGATE, mxsfb->base + MXS_CLR_ADDR);
 
-       ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+       ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
        if (ret)
                return ret;
 
-       return clear_poll_bit(reset_addr, MODULE_CLKGATE);
+       return clear_poll_bit(mxsfb->base, MODULE_CLKGATE);
 }
 
 static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
@@ -213,7 +213,7 @@ static void mxsfb_crtc_mode_set_nofb(struct 
mxsfb_drm_private *mxsfb)
         */
 
        /* Mandatory eLCDIF reset as per the Reference Manual */
-       err = mxsfb_reset_block(mxsfb->base);
+       err = mxsfb_reset_block(mxsfb);
        if (err)
                return;
 
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel