Hi Krishna On Mon, Mar 09, 2020 at 03:52:46PM +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for the device tree bindings for the same. > > Signed-off-by: Krishna Manikandan <mkri...@codeaurora.org> Looks good ow - thanks. Acked-by: Sam Ravnborg <s...@ravnborg.org>
But you should wait for a review by someone more fluent in this area too. Sam > > Changes in v2: > - Changed dpu to DPU (Sam Ravnborg) > - Fixed indentation issues (Sam Ravnborg) > - Added empty line between different properties (Sam Ravnborg) > - Replaced reference txt files with their corresponding > yaml files (Sam Ravnborg) > - Modified the file to use "|" only when it is > necessary (Sam Ravnborg) > --- > .../bindings/display/msm/dpu-sc7180.yaml | 261 +++++++++++++++ > .../bindings/display/msm/dpu-sdm845.yaml | 259 +++++++++++++++ > .../bindings/display/msm/dsi-sc7180.yaml | 362 > +++++++++++++++++++++ > .../bindings/display/msm/dsi-sdm845.yaml | 362 > +++++++++++++++++++++ > 4 files changed, 1244 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > create mode 100644 > Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > create mode 100644 > Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > create mode 100644 > Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > new file mode 100644 > index 0000000..2a9efc5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > @@ -0,0 +1,261 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DPU dt properties. > + > +maintainers: > + - Krishna Manikandan <mkri...@codeaurora.org> > + > +description: | > + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that > encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device > tree > + bindings of MDSS and DPU are mentioned for SC7180 target. > + > +properties: > + "mdss": > + type: object > + description: | > + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP > + interfaces. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-mdss > + > + reg: > + description: Physical base address and length of controller's > registers. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required > region > + is mentioned below. > + items: > + - const: mdss > + > + power-domains: > + description: | > + A power domain consumer specifier according to > + Documentation/devicetree/bindings/power/power-domain.yaml. > + > + clocks: > + description: List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks > property. > + The required clocks are mentioned below. > + items: > + - const: iface > + - const: bus > + - const: ahb > + - const: core > + > + interrupts: > + description: Interrupt signal from MDSS. > + > + interrupt-controller: > + description: Identifies the node as an interrupt controller. > + > + "#interrupt-cells": > + description: | > + Specifies the number of cells needed to encode an interrupt source. > + const: 1 > + > + iommus: > + description: Phandle of iommu device node. > + > + "#address-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to form the base > + address part in the reg property. > + > + "#size-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to specify the > + size part in the reg property. > + > + ranges: > + description: | > + Parent bus address space is the same as the child bus address space. > + > + interconnects : > + description: | > + Interconnect path specifier for MDSS according to > + Documentation/devicetree/bindings/interconnect/interconnect.txt. > + Should be 2 paths corresponding to 2 AXI ports. > + > + interconnect-names: > + description: | > + MDSS will have 2 port names to differentiate between the > + 2 interconnect paths defined with interconnect specifier. > + > + properties: > + description: | > + The optional properties for MDSS are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + "mdp": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-dpu > + > + reg: > + description: | > + Physical base address and length of controller's registers. > + > + reg-names: > + description: | > + Register region names. The following regions are required. > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + description: | > + List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names, must be in same order as clocks property. > + The following clocks are required. "bus" is an optional property > + in sc7180 due to architecture change. > + items: > + - const: iface > + - const: core > + - const: vsync > + > + interrupts: > + description: Interrupt line from DPU to MDSS. > + > + ports: > + type: object > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. These > + are described by the standard properties documented in files > + mentioned below. > + > + Documentation/devicetree/bindings/graph.txt > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + port0: > + type: object > + description: DPU_INTF1 (DSI1) > + port1: > + type: object > + description: DPU_INTF2 (DSI2) > + > + properties: > + description: | > + The optional properties for DPU are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + clock-names: > + description: | > + Optional device clocks, needed for accessing LUT blocks. > + items: > + - const: rot > + - const: lut > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - clock-names > + - interrupts > + - interrupt-controller > + - iommus > + - ports > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > + #include <dt-bindings/clock/qcom,gcc-sc7180.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interconnect/qcom,sdm845.h> > + mdss: mdss@ae00000 { > + compatible = "qcom,sc7180-mdss"; > + reg = <0xae00000 0x1000>; > + reg-names = "mdss"; > + power-domains = <&clock_dispcc 0>; > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "gcc_bus", "core"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; > + > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x800 0x2>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + mdss_mdp: mdp@ae01000 { > + compatible = "qcom,sc7180-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>, > + <0 0x0af03000 0 0x16>; > + reg-names = "mdp", "vbif", "disp_cc"; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "iface", "rot", "lut", "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <300000000>, <19200000>; > + interrupt-parent = <&mdss>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = > <&dsi0_in>; > + }; > + }; > + }; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > new file mode 100644 > index 0000000..bb975938 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > @@ -0,0 +1,259 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DPU dt properties. > + > +maintainers: > + - Krishna Manikandan <mkri...@codeaurora.org> > + > +description: | > + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that > encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device > tree > + bindings of MDSS and DPU are mentioned for SDM845 target. > + > +properties: > + "mdss": > + type: object > + description: | > + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP > + interfaces. > + > + properties: > + compatible: > + items: > + - const: qcom,sdm845-mdss > + > + reg: > + description: Physical base address and length of controller's > registers. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required > region > + is mentioned below. > + items: > + - const: mdss > + > + power-domains: > + description: | > + A power domain consumer specifier according to > + Documentation/devicetree/bindings/power/power-domain.yaml. > + > + clocks: > + description: List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks > property. > + The required clocks are mentioned below. > + items: > + - const: iface > + - const: bus > + - const: core > + > + interrupts: > + description: Interrupt signal from MDSS. > + > + interrupt-controller: > + description: Identifies the node as an interrupt controller. > + > + "#interrupt-cells": > + description: | > + Specifies the number of cells needed to encode an interrupt source. > + const: 1 > + > + iommus: > + description: Phandle of iommu device node. > + > + "#address-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to form the base > + address part in the reg property. > + > + "#size-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to specify the > + size part in the reg property. > + > + ranges: > + description: | > + Parent bus address space is the same as the child bus address space. > + > + interconnects : > + description: | > + Interconnect path specifier for MDSS according to > + Documentation/devicetree/bindings/interconnect/interconnect.txt. > + Should be 2 paths corresponding to 2 AXI ports. > + > + interconnect-names: > + description: | > + MDSS will have 2 port names to differentiate between the > + 2 interconnect paths defined with interconnect specifier. > + > + properties: > + description: | > + The optional properties for MDSS are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + "mdp": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-dpu > + > + reg: > + description: | > + Physical base address and length of controller's registers. > + > + reg-names: > + description: | > + Register region names. The following regions are required. > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + description: | > + List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names, must be in same order as clocks property. > + The following clocks are required. > + items: > + - const: bus > + - const: iface > + - const: core > + - const: vsync > + > + interrupts: > + description: Interrupt line from DPU to MDSS. > + > + ports: > + type: object > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. These > + are described by the standard properties documented in files > + mentioned below. > + > + Documentation/devicetree/bindings/graph.txt > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + port0: > + type: object > + description: DPU_INTF1 (DSI1) > + port1: > + type: object > + description: DPU_INTF2 (DSI2) > + > + properties: > + description: | > + The optional properties for DPU are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - clock-names > + - interrupts > + - interrupt-controller > + - iommus > + - ports > + > +examples: > +- | > + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> > + #include <dt-bindings/clock/qcom,gcc-sdm845.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + mdss: mdss@ae00000 { > + compatible = "qcom,sdm845-mdss"; > + reg = <0 0x0ae00000 0 0x1000>; > + reg-names = "mdss"; > + power-domains = <&dispcc MDSS_GDSC>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "bus", "core"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + iommus = <&apps_smmu 0x880 0x8>, > + <&apps_smmu 0xc80 0x8>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + mdss_mdp: mdp@ae01000 { > + compatible = "qcom,sdm845-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "iface", "bus", "core", "vsync"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <300000000>, > + <19200000>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = > <&dsi0_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dpu_intf2_out: endpoint { > + remote-endpoint = > <&dsi1_in>; > + }; > + }; > + }; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > new file mode 100644 > index 0000000..4727205 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > @@ -0,0 +1,362 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dsi-sc7180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DSI interface dt properties. > + > +maintainers: > + - Krishna Manikandan <mkri...@codeaurora.org> > + > +description: | > + Device tree bindings for DSI controller and DSI PHY for SC7180 target. > + > +properties: > + "dsi-controller": > + type: object > + description: Node containing the properties of DSI controller. > + > + properties: > + compatible: > + items: > + - const: qcom,mdss-dsi-ctrl > + > + reg: > + description: Physical base address and length of registers of > controller. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required > region > + is mentioned below. > + items: > + - const: dsi_ctrl > + > + clocks: > + description: Phandles to device clocks. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks > property. > + The required clocks are mentioned below. For DSIv2, we need an > + additional clock "src" and for DSI6G v2.0 onwards we need > + "byte_intf" clock. > + items: > + - const: iface > + - const: bus > + - const: byte > + - const: pixel > + - const: core > + > + assigned-clocks: > + description: Parents of "byte" and "pixel" for the given platform. > + > + assigned-clock-parents: > + description: | > + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY > block. > + Details on clock bindings are mentioned in > + Documentation/devicetree/bindings/clock/clock-bindings.txt. > + > + vdd-supply: > + description: Phandle to vdd regulator device node. > + > + vddio-supply: > + description: Phandle to vdd-io regulator device node. > + > + vdda-supply: > + description: Phandle to vdda regulator device node. > + > + phys: > + description: Phandle to DSI PHY device node. > + > + phy-names: > + description: Name of the corresponding PHY device. > + > + syscon-sfpb: > + description: A phandle to mmss_sfpb syscon node (only for DSIv2). > + > + ports: > + description: | > + Contains 2 DSI controller ports as child nodes. Each port contains > + an endpoint subnode as defined in > + Documentation/devicetree/bindings/graph.txt and > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + properties: > + description: | > + The optional properties for DSI controller are mentioned below. > + > + panel@0: > + description: | > + Node of panel connected to this DSI controller. > + See files in Documentation/devicetree/bindings/display/panel/ > + for each supported panel. > + > + qcom,dual-dsi-mode: > + description: | > + Boolean value indicating if the DSI controller is > + driving a panel which needs 2 DSI links. > + > + qcom,master-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving > + the master link of the 2-DSI panel. > + > + qcom,sync-dual-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving a > + 2-DSI panel whose 2 links need receive command simultaneously. > + > + pinctrl-names: > + description: The pin control state names; should contain > "default" > + > + pinctrl-0: > + description: The default pinctrl state (active) > + > + pinctrl-n: > + description: The "sleep" pinctrl state > + > + ports: > + description: | > + Contains DSI controller input and output ports as children, > each > + containing one endpoint subnode. > + > + properties: > + description: DSI Endpoint properties > + > + remote-endpoint: > + description: | > + For port@0, set to phandle of the connected panel/bridge's > + input endpoint. For port@1, set to the MDP interface output. > + See Documentation/devicetree/bindings/graph.txt for > + device graph info. > + > + data-lanes: > + description: | > + This describes how the physical DSI data lanes are mapped > + to the logical lanes on the given platform. The value > contained in > + index n describes what physical lane is mapped to the > logical lane n > + (DATAn, where n lies between 0 and 3). The clock lane > position is fixed > + and can't be changed. Hence, they aren't a part of the DT > bindings. See > + Documentation/devicetree/bindings/media/video-interfaces.txt > for > + more info on the data-lanes property. > + > + For example: > + > + data-lanes = <3 0 1 2>; > + > + The above mapping describes that the logical data lane DATA0 > is mapped > + to the physical data lane DATA3, logical DATA1 to physical > DATA0, > + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. > There are > + only a limited number of physical to logical mappings > possible. > + oneOf: > + - const: <0 1 2 3> > + - const: <1 2 3 0> > + - const: <2 3 0 1> > + - const: <3 0 1 2> > + - const: <0 3 2 1> > + - const: <1 0 3 2> > + - const: <2 1 0 3> > + - const: <3 2 1 0> > + > + qcom,mdss-mdp-transfer-time-us: > + description: | > + Specifies the DSI transfer time for command mode > + panels in microseconds. Driver uses this number to adjust > + the clock rate according to the expected transfer time. > + Increasing this value would slow down the mdp processing > + and can result in slower performance. > + Decreasing this value can speed up the mdp processing, > + but this can also impact power consumption. > + As a rule this time should not be higher than the time > + that would be expected with the processing at the > + DSI link rate since anyways this would be the maximum > + transfer time that could be achieved. > + If ping pong split is enabled, this time should not be higher > + than two times the DSI link rate time. > + If the property is not specified, then the default value is > + 14000 us. This is an optional property. > + > + "dsi_phy": > + type: object > + description: Node containing the properties of DSI PHY > + > + properties: > + compatible: > + oneOf: > + - const: qcom,dsi-phy-28nm-hpm > + - const: qcom,dsi-phy-28nm-lp > + - const: qcom,dsi-phy-20nm > + - const: qcom,dsi-phy-28nm-8960 > + - const: qcom,dsi-phy-14nm > + - const: qcom,dsi-phy-10nm > + - const: qcom,dsi-phy-10nm-8998 > + > + reg: > + description: | > + Physical base address and length of the registers of PLL, PHY. Some > + revisions require the PHY regulator base address, whereas others > + require the PHY lane base address. See below for each PHY revision. > + > + reg-names: > + description: Name of register regions. > + oneOf: > + - description: | > + Following regions are required for DSI 28nm HPM/LP/8960 PHYs > and > + 20nm PHY. > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_regulator > + > + - description: | > + Following regions are required for DSI 14nm and 10nm PHYs: > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_lane > + > + clock-cells: > + description: | > + The DSI PHY block acts as a clock provider, creating > + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). > + const: 1 > + > + power-domains: > + description: Should be <&mmcc MDSS_GDSC>. > + > + clocks: > + description: | > + Phandles to device clocks. See > + Documentation/devicetree/bindings/clock/clock-bindings.txt > + for details on clock bindings. > + > + clock-names: > + description: | > + The following clocks are required. > + "iface" > + "ref" (only required for new DTS files/entries) > + > + vddio-supply: > + description: | > + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP, > + 28nm 8960 PHYs and 20nm PHY. > + > + vcca-supply: > + description: | > + Phandle to vcca regulator device node. Required for 20nm PHY and > + 10nm PHY. > + > + vdds-supply: > + description: | > + Phandle to vdds regulator device node. Required for 10nm PHY. > + > + properties: > + description: | > + The optional properties for DSI PHY are mentioned below. > + > + qcom,dsi-phy-regulator-ldo-mode: > + description: | > + Boolean value indicating if the LDO mode PHY regulator is > wanted. > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > + #include <dt-bindings/clock/qcom,gcc-sc7180.h> > + > + dsi0: dsi@fd922800 { > + compatible = "qcom,mdss-dsi-ctrl"; > + qcom,dsi-host-index = <0>; > + interrupt-parent = <&mdp>; > + interrupts = <4 0>; > + reg-names = "dsi_ctrl"; > + reg = <0xfd922800 0x200>; > + power-domains = <&mmcc MDSS_GDSC>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&dsi_phy0 0>, > + <&dsi_phy0 1>; > + > + vdda-supply = <&pma8084_l2>; > + vdd-supply = <&pma8084_l22>; > + vddio-supply = <&pma8084_l12>; > + > + phys = <&dsi_phy0>; > + phy-names ="dsi-phy"; > + > + qcom,dual-dsi-mode; > + qcom,master-dsi; > + qcom,sync-dual-dsi; > + > + qcom,mdss-mdp-transfer-time-us = <12000>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&dsi_active>; > + pinctrl-1 = <&dsi_suspend>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&mdp_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + remote-endpoint = <&panel_in>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + > + panel: panel@0 { > + compatible = "sharp,lq101r1sx01"; > + link2 = <&secondary>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > + > + dsi_phy0: dsi-phy@fd922a00 { > + compatible = "qcom,dsi-phy-28nm-hpm"; > + qcom,dsi-phy-index = <0>; > + reg-names = > + "dsi_pll", > + "dsi_phy", > + "dsi_phy_regulator"; > + reg = <0xfd922a00 0xd4>, > + <0xfd922b00 0x2b0>, > + <0xfd922d80 0x7b>; > + clock-names = "iface"; > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + #clock-cells = <1>; > + #phy-cells = <0>; > + vddio-supply = <&pma8084_l12>; > + > + qcom,dsi-phy-regulator-ldo-mode; > + }; > +... > + > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > new file mode 100644 > index 0000000..e494a7f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > @@ -0,0 +1,362 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dsi-sdm845.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DSI interface dt properties. > + > +maintainers: > + - Krishna Manikandan <mkri...@codeaurora.org> > + > +description: | > + Device tree bindings for DSI controller and DSI PHY for SDM845 target. > + > +properties: > + "dsi-controller": > + type: object > + description: Node containing the properties of DSI controller. > + > + properties: > + compatible: > + items: > + - const: qcom,mdss-dsi-ctrl > + > + reg: > + description: Physical base address and length of registers of > controller. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required > region > + is mentioned below. > + items: > + - const: dsi_ctrl > + > + clocks: > + description: Phandles to device clocks. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks > property. > + The required clocks are mentioned below. For DSIv2, we need an > + additional clock "src" and for DSI6G v2.0 onwards we need > + "byte_intf" clock. > + items: > + - const: iface > + - const: bus > + - const: byte > + - const: pixel > + - const: core > + > + assigned-clocks: > + description: Parents of "byte" and "pixel" for the given platform. > + > + assigned-clock-parents: > + description: | > + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY > block. > + Details on clock bindings are mentioned in > + Documentation/devicetree/bindings/clock/clock-bindings.txt. > + > + vdd-supply: > + description: Phandle to vdd regulator device node. > + > + vddio-supply: > + description: Phandle to vdd-io regulator device node. > + > + vdda-supply: > + description: Phandle to vdda regulator device node. > + > + phys: > + description: Phandle to DSI PHY device node. > + > + phy-names: > + description: Name of the corresponding PHY device. > + > + syscon-sfpb: > + description: A phandle to mmss_sfpb syscon node (only for DSIv2). > + > + ports: > + description: | > + Contains 2 DSI controller ports as child nodes. Each port contains > + an endpoint subnode as defined in > + Documentation/devicetree/bindings/graph.txt and > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + properties: > + description: | > + The optional properties for DSI controller are mentioned below. > + > + panel@0: > + description: | > + Node of panel connected to this DSI controller. > + See files in Documentation/devicetree/bindings/display/panel/ > + for each supported panel. > + > + qcom,dual-dsi-mode: > + description: | > + Boolean value indicating if the DSI controller is > + driving a panel which needs 2 DSI links. > + > + qcom,master-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving > + the master link of the 2-DSI panel. > + > + qcom,sync-dual-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving a > + 2-DSI panel whose 2 links need receive command simultaneously. > + > + pinctrl-names: > + description: The pin control state names; should contain > "default" > + > + pinctrl-0: > + description: The default pinctrl state (active) > + > + pinctrl-n: > + description: The "sleep" pinctrl state > + > + ports: > + description: | > + Contains DSI controller input and output ports as children, > each > + containing one endpoint subnode. > + > + properties: > + description: DSI Endpoint properties > + > + remote-endpoint: > + description: | > + For port@0, set to phandle of the connected panel/bridge's > + input endpoint. For port@1, set to the MDP interface output. > + See Documentation/devicetree/bindings/graph.txt for > + device graph info. > + > + data-lanes: > + description: | > + This describes how the physical DSI data lanes are mapped > + to the logical lanes on the given platform. The value > contained in > + index n describes what physical lane is mapped to the > logical lane n > + (DATAn, where n lies between 0 and 3). The clock lane > position is fixed > + and can't be changed. Hence, they aren't a part of the DT > bindings. See > + Documentation/devicetree/bindings/media/video-interfaces.txt > for > + more info on the data-lanes property. > + > + For example: > + > + data-lanes = <3 0 1 2>; > + > + The above mapping describes that the logical data lane DATA0 > is mapped > + to the physical data lane DATA3, logical DATA1 to physical > DATA0, > + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. > There are > + only a limited number of physical to logical mappings > possible. > + oneOf: > + - const: <0 1 2 3> > + - const: <1 2 3 0> > + - const: <2 3 0 1> > + - const: <3 0 1 2> > + - const: <0 3 2 1> > + - const: <1 0 3 2> > + - const: <2 1 0 3> > + - const: <3 2 1 0> > + > + qcom,mdss-mdp-transfer-time-us: > + description: | > + Specifies the DSI transfer time for command mode > + panels in microseconds. Driver uses this number to adjust > + the clock rate according to the expected transfer time. > + Increasing this value would slow down the mdp processing > + and can result in slower performance. > + Decreasing this value can speed up the mdp processing, > + but this can also impact power consumption. > + As a rule this time should not be higher than the time > + that would be expected with the processing at the > + DSI link rate since anyways this would be the maximum > + transfer time that could be achieved. > + If ping pong split is enabled, this time should not be higher > + than two times the DSI link rate time. > + If the property is not specified, then the default value is > + 14000 us. This is an optional property. > + > + "dsi_phy": > + type: object > + description: Node containing the properties of DSI PHY > + > + properties: > + compatible: > + oneOf: > + - const: qcom,dsi-phy-28nm-hpm > + - const: qcom,dsi-phy-28nm-lp > + - const: qcom,dsi-phy-20nm > + - const: qcom,dsi-phy-28nm-8960 > + - const: qcom,dsi-phy-14nm > + - const: qcom,dsi-phy-10nm > + - const: qcom,dsi-phy-10nm-8998 > + > + reg: > + description: | > + Physical base address and length of the registers of PLL, PHY. Some > + revisions require the PHY regulator base address, whereas others > + require the PHY lane base address. See below for each PHY revision. > + > + reg-names: > + description: Name of register regions. > + oneOf: > + - description: | > + Following regions are required for DSI 28nm HPM/LP/8960 PHYs > and > + 20nm PHY. > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_regulator > + > + - description: | > + Following regions are required for DSI 14nm and 10nm PHYs: > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_lane > + > + clock-cells: > + description: | > + The DSI PHY block acts as a clock provider, creating > + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). > + const: 1 > + > + power-domains: > + description: Should be <&mmcc MDSS_GDSC>. > + > + clocks: > + description: | > + Phandles to device clocks. See > + Documentation/devicetree/bindings/clock/clock-bindings.txt > + for details on clock bindings. > + > + clock-names: > + description: | > + The following clocks are required. > + "iface" > + "ref" (only required for new DTS files/entries) > + > + vddio-supply: > + description: | > + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP, > + 28nm 8960 PHYs and 20nm PHY. > + > + vcca-supply: > + description: | > + Phandle to vcca regulator device node. Required for 20nm PHY and > + 10nm PHY. > + > + vdds-supply: > + description: | > + Phandle to vdds regulator device node. Required for 10nm PHY. > + > + properties: > + description: | > + The optional properties for DSI PHY are mentioned below. > + > + qcom,dsi-phy-regulator-ldo-mode: > + description: | > + Boolean value indicating if the LDO mode PHY regulator is > wanted. > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> > + #include <dt-bindings/clock/qcom,gcc-sdm845.h> > + > + dsi0: dsi@fd922800 { > + compatible = "qcom,mdss-dsi-ctrl"; > + qcom,dsi-host-index = <0>; > + interrupt-parent = <&mdp>; > + interrupts = <4 0>; > + reg-names = "dsi_ctrl"; > + reg = <0xfd922800 0x200>; > + power-domains = <&mmcc MDSS_GDSC>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&dsi_phy0 0>, > + <&dsi_phy0 1>; > + > + vdda-supply = <&pma8084_l2>; > + vdd-supply = <&pma8084_l22>; > + vddio-supply = <&pma8084_l12>; > + > + phys = <&dsi_phy0>; > + phy-names ="dsi-phy"; > + > + qcom,dual-dsi-mode; > + qcom,master-dsi; > + qcom,sync-dual-dsi; > + > + qcom,mdss-mdp-transfer-time-us = <12000>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&dsi_active>; > + pinctrl-1 = <&dsi_suspend>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&mdp_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + remote-endpoint = <&panel_in>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + > + panel: panel@0 { > + compatible = "sharp,lq101r1sx01"; > + link2 = <&secondary>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > + > + dsi_phy0: dsi-phy@fd922a00 { > + compatible = "qcom,dsi-phy-28nm-hpm"; > + qcom,dsi-phy-index = <0>; > + reg-names = > + "dsi_pll", > + "dsi_phy", > + "dsi_phy_regulator"; > + reg = <0xfd922a00 0xd4>, > + <0xfd922b00 0x2b0>, > + <0xfd922d80 0x7b>; > + clock-names = "iface"; > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + #clock-cells = <1>; > + #phy-cells = <0>; > + vddio-supply = <&pma8084_l12>; > + > + qcom,dsi-phy-regulator-ldo-mode; > + }; > +... > + > -- > 1.9.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel