Hi Laurent, On Mon, Apr 06, 2020 at 02:23:17AM +0300, Laurent Pinchart wrote: > Convert the Thine THC63LVD1024 text binding to YAML. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com> > --- > .../display/bridge/thine,thc63lvd1024.txt | 66 ---------- > .../display/bridge/thine,thc63lvd1024.yaml | 121 ++++++++++++++++++ > 2 files changed, 121 insertions(+), 66 deletions(-) > delete mode 100644 > Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt > create mode 100644 > Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > > diff --git > a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt > b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt > deleted file mode 100644 > index d17d1e5820d7..000000000000 > --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt > +++ /dev/null > @@ -1,66 +0,0 @@ > -Thine Electronics THC63LVD1024 LVDS decoder > -------------------------------------------- > - > -The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS > streams > -to parallel data outputs. The chip supports single/dual input/output modes, > -handling up to two LVDS input streams and up to two digital CMOS/TTL outputs. > - > -Single or dual operation mode, output data mapping and DDR output modes are > -configured through input signals and the chip does not expose any control > bus. > - > -Required properties: > -- compatible: Shall be "thine,thc63lvd1024" > -- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input, > - PPL and digital circuitry > - > -Optional properties: > -- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low > -- oe-gpios: Output enable GPIO signal, pin name "OE". Active high > - > -The THC63LVD1024 video port connections are modeled according > -to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt > - > -Required video port nodes: > -- port@0: First LVDS input port > -- port@2: First digital CMOS/TTL parallel output > - > -Optional video port nodes: > -- port@1: Second LVDS input port > -- port@3: Second digital CMOS/TTL parallel output > - > -The device can operate in single-link mode or dual-link mode. In single-link > -mode, all pixels are received on port@0, and port@1 shall not contain any > -endpoint. In dual-link mode, even-numbered pixels are received on port@0 and > -odd-numbered pixels on port@1, and both port@0 and port@1 shall contain > -endpoints. > - > -Example: > --------- > - > - thc63lvd1024: lvds-decoder { > - compatible = "thine,thc63lvd1024"; > - > - vcc-supply = <®_lvds_vcc>; > - powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - > - lvds_dec_in_0: endpoint { > - remote-endpoint = <&lvds_out>; > - }; > - }; > - > - port@2{ > - reg = <2>; > - > - lvds_dec_out_2: endpoint { > - remote-endpoint = <&adv7511_in>; > - }; > - }; > - }; > - }; > diff --git > a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > new file mode 100644 > index 000000000000..469ac4a34273 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml > @@ -0,0 +1,121 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Thine Electronics THC63LVD1024 LVDS Decoder > + > +maintainers: > + - Jacopo Mondi <jacopo+rene...@jmondi.org>
Ack > + - Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com> > + > +description: | > + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS > + streams to parallel data outputs. The chip supports single/dual > input/output > + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL > + outputs. > + > + Single or dual operation mode, output data mapping and DDR output modes are > + configured through input signals and the chip does not expose any control > + bus. > + > +properties: > + compatible: > + const: thine,thc63lvd1024 > + > + ports: > + type: object > + description: | > + This device has four video ports. Their connections are modeled using > the > + OF graph bindings specified in > Documentation/devicetree/bindings/graph.txt. > + > + The device can operate in single-link mode or dual-link mode. In > + single-link mode, all pixels are received on port@0, and port@1 shall > not > + contain any endpoint. In dual-link mode, even-numbered pixels are > + received on port@0 and odd-numbered pixels on port@1, and both port@0 > and > + port@1 shall contain endpoints. I wonder why we have documented only single/dual input mode and not single/dual output mode too. The driver only supports single input and single output, but this might be a good occasion to document the output port mapping as well. How about The device can operate in single or dual input and output modes. When operating in single input mode, all pixels are received on port@0, and port@1 shall not contain any endpoint. In dual input mode, even-numbered pixels are received on port@0 and odd-numbered pixels on port@1, and both port@0 and port@1 shall contain endpoints. When operating in single output mode all pixels are output from the first CMOS/TTL port and port@3 shall not contain any endpoint. In dual output mode pixels are output from both CMOS/TTL ports and both port@2 and port@3 shall contain endpoints. With or without this, as the new bindings are not worse than what they where already: Reviewed-by: Jacopo Mondi <jacopo+rene...@jmondi.org> Thanks j > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + port@0: > + type: object > + description: First LVDS input port > + > + port@1: > + type: object > + description: Second LVDS input port > + > + port@2: > + type: object > + description: First digital CMOS/TTL parallel output > + > + port@3: > + type: object > + description: Second digital CMOS/TTL parallel output > + > + required: > + - port@0 > + - port@2 > + > + additionalProperties: false > + > + oe-gpios: > + maxItems: 1 > + description: Output enable GPIO signal, pin name "OE", active high. > + > + powerdown-gpios: > + maxItems: 1 > + description: Power down GPIO signal, pin name "/PDWN", active low. > + > + vcc-supply: > + maxItems: 1 > + description: > + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL > and > + digital circuitry. > + > +required: > + - compatible > + - ports > + - vcc-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + lvds-decoder { > + compatible = "thine,thc63lvd1024"; > + > + vcc-supply = <®_lvds_vcc>; > + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + lvds_dec_in_0: endpoint { > + remote-endpoint = <&lvds_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + lvds_dec_out_2: endpoint { > + remote-endpoint = <&adv7511_in>; > + }; > + }; > + }; > + }; > + > +... > -- > Regards, > > Laurent Pinchart > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel