Hi Pekka, El vie., 3 abr. 2020 a las 12:03, Pekka Paalanen (<ppaala...@gmail.com>) escribió: > > On Fri, 3 Apr 2020 10:28:52 +0200 > Guillermo Rodriguez <guillerodriguez....@gmail.com> wrote: > > > Hi Pekka, > > > > El vie., 3 abr. 2020 a las 10:14, Pekka Paalanen > > (<ppaala...@gmail.com>) escribió: > > > > > > On Wed, 1 Apr 2020 14:38:37 -0500 > > > Matt Hoosier <matt.hoos...@gmail.com> wrote: > > > > > > > I'm searching for some sort of scheme that will let my DRI master query > > > > the > > > > set of available connectors and select the one carrying a prearranged > > > > designation. The problem I'm trying to solve is to allow deploying one > > > > standardized userspace component across a fleet of devices that have > > > > varying numbers of displays, with the use cases not always driven on the > > > > same connector topologically. > > > > > > > > I had a look around the properties available on my system's DRI > > > > connectors, > > > > and nothing immediate jumped out at me. Is there a standard connector > > > > property that (assuming I can find the right place in DeviceTree or > > > > similar > > > > to) that would be a good fit for this? > > > > > > Hi, > > > > > > I've never heard of a thing that could accomplish that. DRM connector > > > names are not even actually communicated to userspace. What userspace > > > sees is connector type (enum) and some counter numbers (which are not > > > persistent, so not reliable if you have e.g. multiple DRM drivers > > > racing to initialize), > > > > I may be misreading you, but does this mean that the connector names > > used in the [output] section of the weston.ini configuration file are > > not reliable? > > Yes, they are not generally reliable. They are reliable enough in most > cases, particularly if you have only one DRM device with connectors. > DRM drivers themselves often manage to not race internally, so they are > fairly consistent in what order they create their connectors per device. > > Xorg has the exact same problem IIRC, as has probably any display > server on Linux. This means that to find a case where the reliability > actually breaks down you have to try quite hard or be very unlucky, > since it has gone unfixed for so long. > > Likewise you cannot rely that /dev/dri/card0 is always the same device > if you have multiple. That issue is showing up a little more than the > connector naming issue. Hence /dev/dri/by-path/ aliases exist. Network > devices have hit the same naming problem a long time ago already, hence > we nowadays have "Predictable Network Interface Names". > > > Then what is the proper way to configure one specific (physical) > > output in Weston? > > There is no better way yet. I've had some ideas, but no time to look > into them. > > MST connectors have a KMS property for the hardware path, but Weston > does not look at that, and the other connectors don't even have it.
Ok so this is a known "problem" which has never been fixed, probably because in most cases (single DRM device) the current solution is good enough. Thank you for the clarification. BR, Guillermo Rodriguez Garcia guille.rodrig...@gmail.com _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel