Goodmorning Heiko
On Wed, Apr 08, 2020 at 10:53:17AM +0200, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
>
> The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
> with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
>
> They differ in their init sequence and mode details.
>
> changes in v2:
> - add display variants
> changes in v3:
> - fixed indentation and artifacts found by Sam
>
> Signed-off-by: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
That was quick - thanks.
Applied - and now I also have pushed the patches out.
Sam
> ---
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../drm/panel/panel-leadtek-ltk050h3146w.c | 691 ++++++++++++++++++
> 3 files changed, 703 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index a1723c1b5fbf..d56258b9fcaf 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -137,6 +137,17 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
> 24 bit RGB per pixel. It provides a MIPI DSI interface to
> the host and has a built-in LED backlight.
>
> +config DRM_PANEL_LEADTEK_LTK050H3146W
> + tristate "Leadtek LTK050H3146W panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Leadtek LTK050H3146W
> + TFT-LCD modules. The panel has a 720x1280 resolution and uses
> + 24 bit RGB per pixel. It provides a MIPI DSI interface to
> + the host and has a built-in LED backlight.
> +
> config DRM_PANEL_LEADTEK_LTK500HD1829
> tristate "Leadtek LTK500HD1829 panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 96a883cd6630..2335a1e32ae0 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) +=
> panel-ilitek-ili9881c.o
> obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> +obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> new file mode 100644
> index 000000000000..5a7a31c8513e
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> @@ -0,0 +1,691 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/display_timing.h>
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +struct ltk050h3146w_cmd {
> + char cmd;
> + char data;
> +};
> +
> +struct ltk050h3146w;
> +struct ltk050h3146w_desc {
> + const struct drm_display_mode *mode;
> + int (*init)(struct ltk050h3146w *ctx);
> +};
> +
> +struct ltk050h3146w {
> + struct device *dev;
> + struct drm_panel panel;
> + struct gpio_desc *reset_gpio;
> + struct regulator *vci;
> + struct regulator *iovcc;
> + const struct ltk050h3146w_desc *panel_desc;
> + bool prepared;
> +};
> +
> +static const struct ltk050h3146w_cmd page1_cmds[] = {
> + { 0x22, 0x0A }, /* BGR SS GS */
> + { 0x31, 0x00 }, /* column inversion */
> + { 0x53, 0xA2 }, /* VCOM1 */
> + { 0x55, 0xA2 }, /* VCOM2 */
> + { 0x50, 0x81 }, /* VREG1OUT=5V */
> + { 0x51, 0x85 }, /* VREG2OUT=-5V */
> + { 0x62, 0x0D }, /* EQT Time setting */
> +/*
> + * The vendor init selected page 1 here _again_
> + * Is this supposed to be page 2?
> + */
> + { 0xA0, 0x00 },
> + { 0xA1, 0x1A },
> + { 0xA2, 0x28 },
> + { 0xA3, 0x13 },
> + { 0xA4, 0x16 },
> + { 0xA5, 0x29 },
> + { 0xA6, 0x1D },
> + { 0xA7, 0x1E },
> + { 0xA8, 0x84 },
> + { 0xA9, 0x1C },
> + { 0xAA, 0x28 },
> + { 0xAB, 0x75 },
> + { 0xAC, 0x1A },
> + { 0xAD, 0x19 },
> + { 0xAE, 0x4D },
> + { 0xAF, 0x22 },
> + { 0xB0, 0x28 },
> + { 0xB1, 0x54 },
> + { 0xB2, 0x66 },
> + { 0xB3, 0x39 },
> + { 0xC0, 0x00 },
> + { 0xC1, 0x1A },
> + { 0xC2, 0x28 },
> + { 0xC3, 0x13 },
> + { 0xC4, 0x16 },
> + { 0xC5, 0x29 },
> + { 0xC6, 0x1D },
> + { 0xC7, 0x1E },
> + { 0xC8, 0x84 },
> + { 0xC9, 0x1C },
> + { 0xCA, 0x28 },
> + { 0xCB, 0x75 },
> + { 0xCC, 0x1A },
> + { 0xCD, 0x19 },
> + { 0xCE, 0x4D },
> + { 0xCF, 0x22 },
> + { 0xD0, 0x28 },
> + { 0xD1, 0x54 },
> + { 0xD2, 0x66 },
> + { 0xD3, 0x39 },
> +};
> +
> +static const struct ltk050h3146w_cmd page3_cmds[] = {
> + { 0x01, 0x00 },
> + { 0x02, 0x00 },
> + { 0x03, 0x73 },
> + { 0x04, 0x00 },
> + { 0x05, 0x00 },
> + { 0x06, 0x0a },
> + { 0x07, 0x00 },
> + { 0x08, 0x00 },
> + { 0x09, 0x01 },
> + { 0x0a, 0x00 },
> + { 0x0b, 0x00 },
> + { 0x0c, 0x01 },
> + { 0x0d, 0x00 },
> + { 0x0e, 0x00 },
> + { 0x0f, 0x1d },
> + { 0x10, 0x1d },
> + { 0x11, 0x00 },
> + { 0x12, 0x00 },
> + { 0x13, 0x00 },
> + { 0x14, 0x00 },
> + { 0x15, 0x00 },
> + { 0x16, 0x00 },
> + { 0x17, 0x00 },
> + { 0x18, 0x00 },
> + { 0x19, 0x00 },
> + { 0x1a, 0x00 },
> + { 0x1b, 0x00 },
> + { 0x1c, 0x00 },
> + { 0x1d, 0x00 },
> + { 0x1e, 0x40 },
> + { 0x1f, 0x80 },
> + { 0x20, 0x06 },
> + { 0x21, 0x02 },
> + { 0x22, 0x00 },
> + { 0x23, 0x00 },
> + { 0x24, 0x00 },
> + { 0x25, 0x00 },
> + { 0x26, 0x00 },
> + { 0x27, 0x00 },
> + { 0x28, 0x33 },
> + { 0x29, 0x03 },
> + { 0x2a, 0x00 },
> + { 0x2b, 0x00 },
> + { 0x2c, 0x00 },
> + { 0x2d, 0x00 },
> + { 0x2e, 0x00 },
> + { 0x2f, 0x00 },
> + { 0x30, 0x00 },
> + { 0x31, 0x00 },
> + { 0x32, 0x00 },
> + { 0x33, 0x00 },
> + { 0x34, 0x04 },
> + { 0x35, 0x00 },
> + { 0x36, 0x00 },
> + { 0x37, 0x00 },
> + { 0x38, 0x3C },
> + { 0x39, 0x35 },
> + { 0x3A, 0x01 },
> + { 0x3B, 0x40 },
> + { 0x3C, 0x00 },
> + { 0x3D, 0x01 },
> + { 0x3E, 0x00 },
> + { 0x3F, 0x00 },
> + { 0x40, 0x00 },
> + { 0x41, 0x88 },
> + { 0x42, 0x00 },
> + { 0x43, 0x00 },
> + { 0x44, 0x1F },
> + { 0x50, 0x01 },
> + { 0x51, 0x23 },
> + { 0x52, 0x45 },
> + { 0x53, 0x67 },
> + { 0x54, 0x89 },
> + { 0x55, 0xab },
> + { 0x56, 0x01 },
> + { 0x57, 0x23 },
> + { 0x58, 0x45 },
> + { 0x59, 0x67 },
> + { 0x5a, 0x89 },
> + { 0x5b, 0xab },
> + { 0x5c, 0xcd },
> + { 0x5d, 0xef },
> + { 0x5e, 0x11 },
> + { 0x5f, 0x01 },
> + { 0x60, 0x00 },
> + { 0x61, 0x15 },
> + { 0x62, 0x14 },
> + { 0x63, 0x0E },
> + { 0x64, 0x0F },
> + { 0x65, 0x0C },
> + { 0x66, 0x0D },
> + { 0x67, 0x06 },
> + { 0x68, 0x02 },
> + { 0x69, 0x07 },
> + { 0x6a, 0x02 },
> + { 0x6b, 0x02 },
> + { 0x6c, 0x02 },
> + { 0x6d, 0x02 },
> + { 0x6e, 0x02 },
> + { 0x6f, 0x02 },
> + { 0x70, 0x02 },
> + { 0x71, 0x02 },
> + { 0x72, 0x02 },
> + { 0x73, 0x02 },
> + { 0x74, 0x02 },
> + { 0x75, 0x01 },
> + { 0x76, 0x00 },
> + { 0x77, 0x14 },
> + { 0x78, 0x15 },
> + { 0x79, 0x0E },
> + { 0x7a, 0x0F },
> + { 0x7b, 0x0C },
> + { 0x7c, 0x0D },
> + { 0x7d, 0x06 },
> + { 0x7e, 0x02 },
> + { 0x7f, 0x07 },
> + { 0x80, 0x02 },
> + { 0x81, 0x02 },
> + { 0x82, 0x02 },
> + { 0x83, 0x02 },
> + { 0x84, 0x02 },
> + { 0x85, 0x02 },
> + { 0x86, 0x02 },
> + { 0x87, 0x02 },
> + { 0x88, 0x02 },
> + { 0x89, 0x02 },
> + { 0x8A, 0x02 },
> +};
> +
> +static const struct ltk050h3146w_cmd page4_cmds[] = {
> + { 0x70, 0x00 },
> + { 0x71, 0x00 },
> + { 0x82, 0x0F }, /* VGH_MOD clamp level=15v */
> + { 0x84, 0x0F }, /* VGH clamp level 15V */
> + { 0x85, 0x0D }, /* VGL clamp level (-10V) */
> + { 0x32, 0xAC },
> + { 0x8C, 0x80 },
> + { 0x3C, 0xF5 },
> + { 0xB5, 0x07 }, /* GAMMA OP */
> + { 0x31, 0x45 }, /* SOURCE OP */
> + { 0x3A, 0x24 }, /* PS_EN OFF */
> + { 0x88, 0x33 }, /* LVD */
> +};
> +
> +static inline
> +struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel)
> +{
> + return container_of(panel, struct ltk050h3146w, panel);
> +}
> +
> +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + /*
> + * Init sequence was supplied by the panel vendor without much
> + * documentation.
> + */
> + dsi_dcs_write_seq(dsi, 0xdf, 0x93, 0x65, 0xf8);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x01, 0x03, 0x02, 0x00, 0x64, 0x06,
> + 0x01);
> + dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0xb5);
> + dsi_dcs_write_seq(dsi, 0xb3, 0x00, 0xb5);
> + dsi_dcs_write_seq(dsi, 0xb7, 0x00, 0xbf, 0x00, 0x00, 0xbf, 0x00);
> +
> + dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xc4, 0x23, 0x07);
> + dsi_dcs_write_seq(dsi, 0xbb, 0x02, 0x01, 0x24, 0x00, 0x28, 0x0f,
> + 0x28, 0x04, 0xcc, 0xcc, 0xcc);
> + dsi_dcs_write_seq(dsi, 0xbc, 0x0f, 0x04);
> + dsi_dcs_write_seq(dsi, 0xbe, 0x1e, 0xf2);
> + dsi_dcs_write_seq(dsi, 0xc0, 0x26, 0x03);
> + dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x12);
> + dsi_dcs_write_seq(dsi, 0xc3, 0x04, 0x02, 0x02, 0x76, 0x01, 0x80,
> + 0x80);
> + dsi_dcs_write_seq(dsi, 0xc4, 0x24, 0x80, 0xb4, 0x81, 0x12, 0x0f,
> + 0x16, 0x00, 0x00);
> + dsi_dcs_write_seq(dsi, 0xc8, 0x7f, 0x72, 0x67, 0x5d, 0x5d, 0x50,
> + 0x56, 0x41, 0x59, 0x57, 0x55, 0x70, 0x5b, 0x5f,
> + 0x4f, 0x47, 0x38, 0x23, 0x08, 0x7f, 0x72, 0x67,
> + 0x5d, 0x5d, 0x50, 0x56, 0x41, 0x59, 0x57, 0x55,
> + 0x70, 0x5b, 0x5f, 0x4f, 0x47, 0x38, 0x23, 0x08);
> + dsi_dcs_write_seq(dsi, 0xd0, 0x1e, 0x1f, 0x57, 0x58, 0x48, 0x4a,
> + 0x44, 0x46, 0x40, 0x1f, 0x42, 0x1f, 0x1f, 0x1f,
> + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
> + dsi_dcs_write_seq(dsi, 0xd1, 0x1e, 0x1f, 0x57, 0x58, 0x49, 0x4b,
> + 0x45, 0x47, 0x41, 0x1f, 0x43, 0x1f, 0x1f, 0x1f,
> + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
> + dsi_dcs_write_seq(dsi, 0xd2, 0x1f, 0x1e, 0x17, 0x18, 0x07, 0x05,
> + 0x0b, 0x09, 0x03, 0x1f, 0x01, 0x1f, 0x1f, 0x1f,
> + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
> + dsi_dcs_write_seq(dsi, 0xd3, 0x1f, 0x1e, 0x17, 0x18, 0x06, 0x04,
> + 0x0a, 0x08, 0x02, 0x1f, 0x00, 0x1f, 0x1f, 0x1f,
> + 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
> + dsi_dcs_write_seq(dsi, 0xd4, 0x00, 0x00, 0x00, 0x0c, 0x06, 0x20,
> + 0x01, 0x02, 0x00, 0x60, 0x15, 0xb0, 0x30, 0x03,
> + 0x04, 0x00, 0x60, 0x72, 0x0a, 0x00, 0x60, 0x08);
> + dsi_dcs_write_seq(dsi, 0xd5, 0x00, 0x06, 0x06, 0x00, 0x30, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0xbc, 0x50, 0x00, 0x05,
> + 0x21, 0x00, 0x60);
> + dsi_dcs_write_seq(dsi, 0xdd, 0x2c, 0xa3, 0x00);
> + dsi_dcs_write_seq(dsi, 0xde, 0x02);
> + dsi_dcs_write_seq(dsi, 0xb2, 0x32, 0x1c);
> + dsi_dcs_write_seq(dsi, 0xb7, 0x3b, 0x70, 0x00, 0x04);
> + dsi_dcs_write_seq(dsi, 0xc1, 0x11);
> + dsi_dcs_write_seq(dsi, 0xbb, 0x21, 0x22, 0x23, 0x24, 0x36, 0x37);
> + dsi_dcs_write_seq(dsi, 0xc2, 0x20, 0x38, 0x1e, 0x84);
> + dsi_dcs_write_seq(dsi, 0xde, 0x00);
> +
> + ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
> + ret);
> + return ret;
> + }
> +
> + msleep(60);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode ltk050h3146w_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 42,
> + .hsync_end = 720 + 42 + 8,
> + .htotal = 720 + 42 + 8 + 42,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 12,
> + .vsync_end = 1280 + 12 + 4,
> + .vtotal = 1280 + 12 + 4 + 18,
> + .clock = 64018,
> + .width_mm = 62,
> + .height_mm = 110,
> +};
> +
> +static const struct ltk050h3146w_desc ltk050h3146w_data = {
> + .mode = <k050h3146w_mode,
> + .init = ltk050h3146w_init_sequence,
> +};
> +
> +static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + u8 d[3] = { 0x98, 0x81, page };
> +
> + return mipi_dsi_dcs_write(dsi, 0xff, d, ARRAY_SIZE(d));
> +}
> +
> +static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page,
> + const struct ltk050h3146w_cmd *cmds,
> + int num)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int i, ret;
> +
> + ret = ltk050h3146w_a2_select_page(ctx, page);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to select page %d: %d\n",
> + page, ret);
> + return ret;
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = mipi_dsi_generic_write(dsi, &cmds[i],
> + sizeof(struct ltk050h3146w_cmd));
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev,
> + "failed to write page %d init cmds: %d\n",
> + page, ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ltk050h3146w_a2_init_sequence(struct ltk050h3146w *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + /*
> + * Init sequence was supplied by the panel vendor without much
> + * documentation.
> + */
> + ret = ltk050h3146w_a2_write_page(ctx, 3, page3_cmds,
> + ARRAY_SIZE(page3_cmds));
> + if (ret < 0)
> + return ret;
> +
> + ret = ltk050h3146w_a2_write_page(ctx, 4, page4_cmds,
> + ARRAY_SIZE(page4_cmds));
> + if (ret < 0)
> + return ret;
> +
> + ret = ltk050h3146w_a2_write_page(ctx, 1, page1_cmds,
> + ARRAY_SIZE(page1_cmds));
> + if (ret < 0)
> + return ret;
> +
> + ret = ltk050h3146w_a2_select_page(ctx, 0);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to select page 0: %d\n", ret);
> + return ret;
> + }
> +
> + /* vendor code called this without param, where there should be one */
> + ret = mipi_dsi_dcs_set_tear_on(dsi, 0);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
> + ret);
> + return ret;
> + }
> +
> + msleep(60);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode ltk050h3146w_a2_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 42,
> + .hsync_end = 720 + 42 + 10,
> + .htotal = 720 + 42 + 10 + 60,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 18,
> + .vsync_end = 1280 + 18 + 4,
> + .vtotal = 1280 + 18 + 4 + 12,
> + .clock = 65595,
> + .width_mm = 62,
> + .height_mm = 110,
> +};
> +
> +static const struct ltk050h3146w_desc ltk050h3146w_a2_data = {
> + .mode = <k050h3146w_a2_mode,
> + .init = ltk050h3146w_a2_init_sequence,
> +};
> +
> +static int ltk050h3146w_unprepare(struct drm_panel *panel)
> +{
> + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
> + ret);
> + return ret;
> + }
> +
> + mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
> + ret);
> + return ret;
> + }
> +
> + regulator_disable(ctx->iovcc);
> + regulator_disable(ctx->vci);
> +
> + ctx->prepared = false;
> +
> + return 0;
> +}
> +
> +static int ltk050h3146w_prepare(struct drm_panel *panel)
> +{
> + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
> + ret = regulator_enable(ctx->vci);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to enable vci supply: %d\n", ret);
> + return ret;
> + }
> + ret = regulator_enable(ctx->iovcc);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to enable iovcc supply: %d\n", ret);
> + goto disable_vci;
> + }
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(5000, 6000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(20);
> +
> + ret = ctx->panel_desc->init(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
> + ret);
> + goto disable_iovcc;
> + }
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
> + goto disable_iovcc;
> + }
> +
> + /* T9: 120ms */
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
> + goto disable_iovcc;
> + }
> +
> + msleep(50);
> +
> + ctx->prepared = true;
> +
> + return 0;
> +
> +disable_iovcc:
> + regulator_disable(ctx->iovcc);
> +disable_vci:
> + regulator_disable(ctx->vci);
> + return ret;
> +}
> +
> +static int ltk050h3146w_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs ltk050h3146w_funcs = {
> + .unprepare = ltk050h3146w_unprepare,
> + .prepare = ltk050h3146w_prepare,
> + .get_modes = ltk050h3146w_get_modes,
> +};
> +
> +static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct ltk050h3146w *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->panel_desc = of_device_get_match_data(dev);
> + if (!ctx->panel_desc)
> + return -EINVAL;
> +
> + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio)) {
> + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> + return PTR_ERR(ctx->reset_gpio);
> + }
> +
> + ctx->vci = devm_regulator_get(dev, "vci");
> + if (IS_ERR(ctx->vci)) {
> + ret = PTR_ERR(ctx->vci);
> + if (ret != -EPROBE_DEFER)
> + DRM_DEV_ERROR(dev,
> + "Failed to request vci regulator: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ctx->iovcc = devm_regulator_get(dev, "iovcc");
> + if (IS_ERR(ctx->iovcc)) {
> + ret = PTR_ERR(ctx->iovcc);
> + if (ret != -EPROBE_DEFER)
> + DRM_DEV_ERROR(dev,
> + "Failed to request iovcc regulator: %d\n",
> + ret);
> + return ret;
> + }
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
> +
> + drm_panel_init(&ctx->panel, &dsi->dev, <k050h3146w_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret)
> + return ret;
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void ltk050h3146w_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = drm_panel_unprepare(&ctx->panel);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
> + ret);
> +
> + ret = drm_panel_disable(&ctx->panel);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
> + ret);
> +}
> +
> +static int ltk050h3146w_remove(struct mipi_dsi_device *dsi)
> +{
> + struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ltk050h3146w_shutdown(dsi);
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
> + ret);
> +
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ltk050h3146w_of_match[] = {
> + {
> + .compatible = "leadtek,ltk050h3146w",
> + .data = <k050h3146w_data,
> + },
> + {
> + .compatible = "leadtek,ltk050h3146w-a2",
> + .data = <k050h3146w_a2_data,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match);
> +
> +static struct mipi_dsi_driver ltk050h3146w_driver = {
> + .driver = {
> + .name = "panel-leadtek-ltk050h3146w",
> + .of_match_table = ltk050h3146w_of_match,
> + },
> + .probe = ltk050h3146w_probe,
> + .remove = ltk050h3146w_remove,
> + .shutdown = ltk050h3146w_shutdown,
> +};
> +module_mipi_dsi_driver(ltk050h3146w_driver);
> +
> +MODULE_AUTHOR("Heiko Stuebner <heiko.stueb...@theobroma-systems.com>");
> +MODULE_DESCRIPTION("DRM driver for Leadtek LTK050H3146W MIPI DSI panel");
> +MODULE_LICENSE("GPL v2");
> --
> 2.24.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
