Hi Eugeniy.

On Tue, Apr 14, 2020 at 05:44:02PM +0300, Eugeniy Paltsev wrote:
> This patch adds documentation of device tree bindings for the Synopsys
> HDMI 2.0 TX encoder driver for ARC SoCs.
> 
> Signed-off-by: Eugeniy Paltsev <eugeniy.palt...@synopsys.com>
Acked-by: Sam Ravnborg <s...@ravnborg.org>

with a few nits addressed.

As already mentioned - the filename confuses.
Maybe tell why in changelog - og fix filename to follow compatible.

> ---
>  .../display/bridge/snps,arc-dw-hdmi.yaml      | 131 ++++++++++++++++++
>  1 file changed, 131 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml 
> b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> new file mode 100644
> index 000000000000..f52fc3b114b0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> @@ -0,0 +1,131 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/snps,arc-dw-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare HDMI 2.0 TX encoder driver
> +
> +maintainers:
> +  - Eugeniy Paltsev <eugeniy.palt...@synopsys.com>
> +
> +description: |
> +  The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP
> +  with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP.
> +
> +  These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> +  Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +  with the following device-specific properties.
> +
> +properties:
> +  compatible:
> +    const: snps,dw-hdmi-hsdk
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +      Memory mapped base address and length of the DWC HDMI TX registers.
> +
> +  clocks:
> +    items:
> +      - description: The bus clock for AHB / APB
> +      - description: The internal register configuration clock
> +
> +  clock-names:
> +    items:
> +      - const: iahb
> +      - const: isfr
> +
> +  reg-io-width:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [1, 4]
> +        description:
> +          Width of the registers specified by the reg property. The
> +          value is expressed in bytes and must be equal to 1 or 4 if 
> specified.
> +          The register width defaults to 1 if the property is not present.
> +
> +  ports:
> +    type: object
> +    description: |
> +      A ports node with endpoint definitions as defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        description: |
> +          Video input endpoints of the controller.
> +          Usually the associated with PGU.
Please rephrase this sentence. I am not sure how to read it.

> +
> +      port@1:
> +        type: object
> +        description: |
> +          Output endpoints of the controller. HDMI connector.
> +
> +    required:
> +      - "#address-cells"
> +      - "#size-cells"
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    hdmi: hdmi@0x10000 {
hdmi
> +        compatible = "snps,dw-hdmi-hsdk";
> +        reg = <0x10000 0x10000>;
> +        reg-io-width = <4>;
> +        interrupts = <14>;
> +        clocks = <&apbclk>, <&hdmi_pix_clk>;
> +        clock-names = "iahb", "isfr";
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                hdmi_enc_input: endpoint {
> +                    remote-endpoint = <&pgu_output>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                hdmi_enc_out: endpoint {
> +                    remote-endpoint = <&hdmi_con>;
> +                };
> +            };
> +        };
> +    };
> +
> +    hdmi-out {
> +        port {
> +            hdmi_con: endpoint {
> +                remote-endpoint = <&hdmi_enc_out>;
> +            };
> +        };
> +    };
> +
> +    pgu {
> +        port_o: port {
> +            pgu_output: endpoint {
> +                remote-endpoint = <&hdmi_enc_input>;
> +            };
> +        };
> +    };
> -- 
> 2.21.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to