Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.

Note: the bridge panel will use the connector type from the panel.

Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Cc: Andrzej Hajda <a.ha...@samsung.com>
Cc: Neil Armstrong <narmstr...@baylibre.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Jonas Karlman <jo...@kwiboo.se>
Cc: Jernej Skrabec <jernej.skra...@siol.net>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c 
b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 6ad688b320ae..c306d3069037 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -98,7 +98,7 @@ struct ti_sn_bridge {
        struct device_node              *host_node;
        struct mipi_dsi_device          *dsi;
        struct clk                      *refclk;
-       struct drm_panel                *panel;
+       struct drm_bridge               *panel_bridge;
        struct gpio_desc                *enable_gpio;
        struct regulator_bulk_data      supplies[SN_REGULATOR_SUPPLY_NUM];
        int                             dp_lanes;
@@ -208,7 +208,7 @@ static int ti_sn_bridge_connector_get_modes(struct 
drm_connector *connector)
 {
        struct ti_sn_bridge *pdata = connector_to_ti_sn_bridge(connector);
 
-       return drm_panel_get_modes(pdata->panel, connector);
+       return drm_bridge_get_modes(pdata->panel_bridge, connector);
 }
 
 static enum drm_mode_status
@@ -340,9 +340,8 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
        pdata->dsi = dsi;
 
        /* attach panel to bridge */
-       drm_panel_attach(pdata->panel, &pdata->connector);
-
-       return 0;
+       return drm_bridge_attach(bridge->encoder, pdata->panel_bridge,
+                                bridge, flags);
 
 err_dsi_attach:
        mipi_dsi_device_unregister(dsi);
@@ -355,16 +354,12 @@ static void ti_sn_bridge_disable(struct drm_bridge 
*bridge)
 {
        struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
 
-       drm_panel_disable(pdata->panel);
-
        /* disable video stream */
        regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG, VSTREAM_ENABLE, 0);
        /* semi auto link training mode OFF */
        regmap_write(pdata->regmap, SN_ML_TX_MODE_REG, 0);
        /* disable DP PLL */
        regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 0);
-
-       drm_panel_unprepare(pdata->panel);
 }
 
 static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata)
@@ -731,8 +726,6 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
        /* enable video stream */
        regmap_update_bits(pdata->regmap, SN_ENH_FRAME_REG, VSTREAM_ENABLE,
                           VSTREAM_ENABLE);
-
-       drm_panel_enable(pdata->panel);
 }
 
 static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge)
@@ -762,8 +755,6 @@ static void ti_sn_bridge_pre_enable(struct drm_bridge 
*bridge)
         */
        regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE,
                           HPD_DISABLE);
-
-       drm_panel_prepare(pdata->panel);
 }
 
 static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
@@ -878,6 +869,8 @@ static int ti_sn_bridge_probe(struct i2c_client *client,
                              const struct i2c_device_id *id)
 {
        struct ti_sn_bridge *pdata;
+       struct drm_bridge *bridge;
+       struct drm_panel *panel;
        int ret;
 
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
@@ -900,12 +893,18 @@ static int ti_sn_bridge_probe(struct i2c_client *client,
        pdata->dev = &client->dev;
 
        ret = drm_of_find_panel_or_bridge(pdata->dev->of_node, 1, 0,
-                                         &pdata->panel, NULL);
+                                         &panel, NULL);
        if (ret) {
                DRM_ERROR("could not find any panel node\n");
                return ret;
        }
 
+       bridge = devm_drm_panel_bridge_add(pdata->dev, panel);
+       if (IS_ERR(bridge))
+               return PTR_ERR(bridge);
+
+       pdata->panel_bridge = bridge;
+
        dev_set_drvdata(&client->dev, pdata);
 
        pdata->enable_gpio = devm_gpiod_get(pdata->dev, "enable",
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to