Hi Tomi, On Tue, Apr 28, 2020 at 12:49:28PM +0300, Tomi Valkeinen wrote: > On 28/04/2020 12:20, Ricardo Cañuelo wrote: > > > 2) The definition of ti,deskew in the original binding seems to be > > tailored to the current driver and the way it's defined may not be very > > DT-friendly. > > > > This parameter maps to a 3-bit field in a hardware register that takes > > a value from 0 to 7, so the [-4, 3] range described for this would map > > to [000, 111]: -4 -> 000, -3 -> 001, -2 -> 010, ... 3 -> 111. > > > > Then, the driver parses the parameter (unsigned) and casts it to a > > signed integer to get a number in the [-4, 3] range. > > Interestingly the current example has ti,deskew = <4>... > > > A vendor-specific property must have a type definition in json-schema, > > so if I translate the original bindings semantics directly, I should > > define ti,deskew as an int32, but this makes dt_binding_check fail if > > the property has a negative value in the example because of the > > internal representation of cells as unsigned integers: > > > > ti,deskew:0:0: 4294967293 is greater than the maximum of 2147483647 > > I don't quite understand this. We cannot have negative numbers in dts files? > Or we can, but > dt_binding_check doesn't handle them correctly? Or that int32 is not > supported in yaml bindings? > > > So I can think of two solutions to this: > > > > a) Keep the ti,deskew property as an uint32 and document the valid > > range ([-4, 3]) in the property description (this is what this patch > > does currently). > > > > b) Redefine this property to be closer to the datasheet description > > (ie. unsigned integers from 0 to 7) and adapt the driver accordingly. > > This would also let us define its range properly using minimum and > > maximum properties for it. > > > > I think (b) is the right thing to do but I want to know your > > opinion. Besides, I don't have this hardware at hand and if I updated > > the driver I wouldn't be able to test it. > > I don't think anyone has used deskew property, so I guess changing it is not > out of the question. > > Laurent, did you have a board that needs deskew when you added it to tfp410?
I didn't if I remember correctly, I just mapped it to the hardware features. The hardware register indeed takes a value between 0 and 7, and that is mapped to [-4,3] x t(STEP). I don't mind either option. -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
