On Fri, May 15, 2020 at 03:12:10PM +0200, Guido Günther wrote: > The bridge allows to select the input source via a mux controller. > > Signed-off-by: Guido Günther <a...@sigxcpu.org> > --- > .../display/bridge/mux-input-bridge.yaml | 123 ++++++++++++++++++ > 1 file changed, 123 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/mux-input-bridge.yaml > > diff --git > a/Documentation/devicetree/bindings/display/bridge/mux-input-bridge.yaml > b/Documentation/devicetree/bindings/display/bridge/mux-input-bridge.yaml > new file mode 100644 > index 000000000000..4029cf63ee5c > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/mux-input-bridge.yaml > @@ -0,0 +1,123 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/mux-input-bridge.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: DRM input source selection via multiplexer
DRM is not a hardware thing. The graph binding is already designed to support muxing. Generally, multiple endpoints on an input node is a mux. So either the device with the input ports knows how to select the input, or you just need a mux-control property for the port to have some other device implement the control. You could do it like you have below. That would be appropriate if there's a separate h/w device controlling the muxing. Say for example some board level device controlled by i2c. Rob _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel