Hi Sylwester,
On 5/30/20 1:32 AM, Sylwester Nawrocki wrote:
> From: Marek Szyprowski <m.szyprow...@samsung.com>
>
> This patch adds interconnect support to exynos-mixer. The mixer works
> the same as before when CONFIG_INTERCONNECT is 'n'.
>
> For proper operation of the video mixer block we need to ensure the
> interconnect busses like DMC or LEFTBUS provide enough bandwidth so
> as to avoid DMA buffer underruns in the mixer block. i.e we need to
> prevent those busses from operating in low perfomance OPPs when
> the mixer is running.
> In this patch the bus bandwidth request is done through the interconnect
> API, the bandiwidth value is calculated from selected DRM mode, i.e.
> video plane width, height, refresh rate and pixel format.
>
> Co-developed-by: Artur Świgoń <a.swi...@samsung.com>
> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
> [s.nawrocki: renamed soc_path variable to icc_path, edited commit desc.]
> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> ---
> Changes for v5:
> - renamed soc_path variable to icc_path
> ---
> drivers/gpu/drm/exynos/exynos_mixer.c | 73
> ++++++++++++++++++++++++++++++++---
> 1 file changed, 68 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c
> b/drivers/gpu/drm/exynos/exynos_mixer.c
> index 21b726b..bdae683 100644
> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
> @@ -13,6 +13,7 @@
> #include <linux/component.h>
> #include <linux/delay.h>
> #include <linux/i2c.h>
> +#include <linux/interconnect.h>
> #include <linux/interrupt.h>
> #include <linux/irq.h>
> #include <linux/kernel.h>
> @@ -98,6 +99,7 @@ struct mixer_context {
> struct exynos_drm_crtc *crtc;
> struct exynos_drm_plane planes[MIXER_WIN_NR];
> unsigned long flags;
> + struct icc_path *icc_path;
>
> int irq;
> void __iomem *mixer_regs;
> @@ -934,6 +936,42 @@ static void mixer_disable_vblank(struct exynos_drm_crtc
> *crtc)
> mixer_reg_writemask(mixer_ctx, MXR_INT_EN, 0, MXR_INT_EN_VSYNC);
> }
>
> +static void mixer_set_memory_bandwidth(struct exynos_drm_crtc *crtc)
> +{
> + struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
> + struct mixer_context *ctx = crtc->ctx;
> + unsigned long bw, bandwidth = 0;
> + u32 avg_bw, peak_bw;
> + int i, j, sub;
> +
> + if (!ctx->icc_path)
> + return;
> +
> + for (i = 0; i < MIXER_WIN_NR; i++) {
> + struct drm_plane *plane = &ctx->planes[i].base;
> + const struct drm_format_info *format;
> +
> + if (plane->state && plane->state->crtc && plane->state->fb) {
> + format = plane->state->fb->format;
> + bw = mode->hdisplay * mode->vdisplay *
> + drm_mode_vrefresh(mode);
> + if (mode->flags & DRM_MODE_FLAG_INTERLACE)
> + bw /= 2;
> + for (j = 0; j < format->num_planes; j++) {
> + sub = j ? (format->vsub * format->hsub) : 1;
> + bandwidth += format->cpp[j] * bw / sub;
First of all, I agree this approach.
Could you please add more detailed comments for understadning
about this calculation? As you commented, it seems that
the final bandwidth contains the width/height/refresh rate
and pixel format. If you add one real example, it will be very helpful.
(snip)
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
