From: Chandan Uddaraju <chand...@codeaurora.org> Add bindings for Snapdragon DisplayPort controller driver.
Changes in V2: Provide details about sel-gpio Changes in V4: Provide details about max dp lanes Change the commit text Changes in V5: moved dp.txt to yaml file Changes in v6: - Squash all AUX LUT properties into one pattern Property - Make aux-cfg[0-9]-settings properties optional - Remove PLL/PHY bindings from DP controller dts - Add DP clocks description - Remove _clk suffix from clock names - Rename pixel clock to stream_pixel - Remove redundant bindings (GPIO, PHY, HDCP clock, etc..) - Fix indentation - Add Display Port as interface of DPU in DPU bindings and add port mapping accordingly. Signed-off-by: Chandan Uddaraju <chand...@codeaurora.org> Signed-off-by: Vara Reddy <va...@codeaurora.org> Signed-off-by: Tanmay Shah <tan...@codeaurora.org> --- .../bindings/display/msm/dp-sc7180.yaml | 142 ++++++++++++++++++ .../devicetree/bindings/display/msm/dpu.txt | 8 + 2 files changed, 150 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml new file mode 100644 index 000000000000..5fdb9153df00 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dp-sc7180.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Port Controller. + +maintainers: + - Chandan Uddaraju <chand...@codeaurora.org> + - Vara Reddy <va...@codeaurora.org> + - Tanmay Shah <tan...@codeaurora.org> + +description: | + Device tree bindings for MSM Display Port which supports DP host controllers + that are compatible with VESA Display Port interface specification. + +properties: + compatible: + items: + - const: qcom,dp-display + + cell-index: + description: Specifies the controller instance. + + reg: + items: + - description: DP controller registers + + interrupts: + description: The interrupt signal from the DP block. + + clocks: + description: List of clock specifiers for clocks needed by the device. + items: + - description: Display Port AUX clock + - description: Display Port Link clock + - description: Link interface clock between DP and PHY + - description: Display Port Pixel clock + - description: Root clock generator for pixel clock + + clock-names: + description: | + Device clock names in the same order as mentioned in clocks property. + The required clocks are mentioned below. + items: + - const: core_aux + - const: ctrl_link + - const: ctrl_link_iface + - const: stream_pixel + - const: pixel_rcg + "#clock-cells": + const: 1 + + vdda-1p2-supply: + description: phandle to vdda 1.2V regulator node. + + vdda-0p9-supply: + description: phandle to vdda 0.9V regulator node. + + data-lanes = <0 1>: + type: object + description: Maximum number of lanes that can be used for Display port. + + ports: + description: | + Contains display port controller endpoint subnode. + remote-endpoint: | + For port@0, set to phandle of the connected panel/bridge's + input endpoint. For port@1, set to the DPU interface output. + Documentation/devicetree/bindings/graph.txt and + Documentation/devicetree/bindings/media/video-interfaces.txt. + +patternProperties: + "^aux-cfg([0-9])-settings$": + type: object + description: | + Specifies the DP AUX configuration [0-9] settings. + The first entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. + +required: + - compatible + - cell-index + - reg + - interrupts + - clocks + - clock-names + - vdda-1p2-supply + - vdda-0p9-supply + - data-lanes + - ports + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + msm_dp: displayport-controller@ae90000{ + compatible = "qcom,dp-display"; + cell-index = <0>; + reg = <0 0xae90000 0 0x1400>; + reg-names = "dp_controller"; + + interrupt-parent = <&display_subsystem>; + interrupts = <12 0>; + + clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + clock-names = "core_aux", + "ctrl_link", + "ctrl_link_iface", "stream_pixel", + "pixel_rcg"; + #clock-cells = <1>; + + vdda-1p2-supply = <&vreg_l3c_1p2>; + vdda-0p9-supply = <&vreg_l4a_0p8>; + + data-lanes = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + dp_out: endpoint { + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt index 551ae26f60da..30c8ab479b02 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu.txt +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt @@ -65,6 +65,7 @@ Required properties: Port 0 -> DPU_INTF1 (DSI1) Port 1 -> DPU_INTF2 (DSI2) + Port 2 -> DPU_INTF0 (DP) Optional properties: - assigned-clocks: list of clock specifiers for clocks needing rate assignment @@ -136,6 +137,13 @@ Example: remote-endpoint = <&dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; }; }; }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
