On Thu, Jun 18, 2020 at 12:58:33AM +0800, Cyrus Lien wrote: > On Tue, Jun 9, 2020 at 10:58 PM Ville Syrjälä <ville.syrj...@linux.intel.com> > wrote: > > > On Tue, Jun 09, 2020 at 03:57:04AM +0800, Cyrus Lien wrote: > > > According to EDID spec, table 3.26, byte #6 and #8, which said "Minimum > > > rate value shall be less than or equal to maximum rate value". The > > minimum > > > horizontal/vertical rate value is able to be equal to maximum horizontal/ > > > veritcal rate value. > > > > How does that justifiy ignoring the min value? > > > > Indeed, this patch does not make sense. > Setting minimum horizontal rate equal to maximum horizontal rate is a > request come from AMD Windows graphic driver for support freesync (I'm not > sure if linux AMD driver also require it).
AFAICS the DP spec itself doesn't say anything about the horizontal min/max rates. However DP-EDID-CTS 1.2 / 4.8 seems to say that hmin==hmax==hsync should hold. Not sure if that should be the hsync rate of the min/max/nominal refresh rate. I would have maybe expected the max since that's the actual rate it's going operate at. Alhtough I even less of an idea what it should be if the monitor supports multiple resolutions. In this case it doesn't seem to be any of those exactly. Pretty close to the min refresh rate though. hmin=hmax=110 kHz vs. actual hsync rate for 50Hz would be 111.1 kHz (if it was actually running at 50Hz with the declared vblank length which it won't be of course). If we calculate in the opposite direction we get a vrefresh of ~49.5 Hz based on the 110 kHz hsync rate. So if we round to nearest integer it does match the declared vmin of 50Hz. I suspect the right answer is to just ignore hmin/hmax when it comes to adaptive sync. > The problem is mode_in_hsync_range always return false except the mode's > hsync exactly equal to hmax and hmin. > > Add print in mode_in_hsync_range(): > [drm] mode_in_hsync_range 1920x1200: hsync: 94, hmax: 110, hmix:110 > [drm] mode_in_hsync_range 1920x1200: hsync: 107, hmax: 110, hmix:110 > [drm] mode_in_hsync_range 1920x1200: hsync: 152, hmax: 110, hmix:110 > [drm] mode_in_hsync_range 1920x1440: hsync: 90, hmax: 110, hmix:110 > [drm] mode_in_hsync_range 1920x1440: hsync: 113, hmax: 110, hmix:110 > [drm] mode_in_hsync_range 1920x1440: hsync: 183, hmax: 110, hmix:110 > > Is it available to get or calculate the hmax, hmix value from other fields > in EDID ? > Would you please provide some advice or directions to solve this problem ? > Thank you and appreciated the help. > > edid-decode (hex): > > 00 ff ff ff ff ff ff 00 06 af 9b 32 00 00 00 00 > 00 1e 01 04 b5 26 15 78 03 1f 95 a5 53 35 b5 26 > 0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 > 01 01 01 01 01 01 70 d0 00 a0 f0 70 3e 80 30 20 > 35 00 7d d6 10 00 00 1a 00 00 00 fd 00 32 5a 6e > 6e 17 01 11 01 e0 60 20 50 3c 00 00 00 fe 00 34 > 34 54 52 4e 15 42 31 37 33 5a 41 4e 00 00 00 00 > 00 05 81 01 28 00 12 00 00 0b 01 0a 20 20 01 af > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > ---------------- > > EDID version: 1.4 > Manufacturer: AUO Model 12955 Serial Number 0 > Made in year 2020 > Digital display > 10 bits per primary color channel > DisplayPort interface > Maximum image size: 38 cm x 21 cm > Gamma: 2.20 > Supported color formats: RGB 4:4:4 > First detailed timing includes the native pixel format and preferred > refresh rate > Display is continuous frequency > Color Characteristics > Red: 0.6445, 0.3251 > Green: 0.2099, 0.7099 > Blue: 0.1503, 0.0595 > White: 0.3134, 0.3291 > Established Timings I & II: none > Standard Timings: none > Detailed mode: Clock 533.600 MHz, 381 mm x 214 mm > 3840 3888 3920 4000 ( 48 32 80) > 2160 2163 2168 2222 ( 3 5 54) > +hsync -vsync > VertFreq: 60.036 Hz, HorFreq: 133.400 kHz > Display Range Limits > Monitor ranges (Bare Limits): 50-90 Hz V, 110-110 kHz H, max dotclock 230 > MHz > Alphanumeric Data String: 44TRN > Manufacturer-Specified Display Descriptor (0x00): 00 00 00 05 81 01 28 00 > 12 00 00 0b 01 0a 20 20 ......(....... > Has 1 extension block > Checksum: 0xaf > > ---------------- > > > > > > This change check if h/v-sync excess maximum horizontal/vertical rate if > > > hmin equal to hmax or vmin equal to vmax. > > > > > > Signed-off-by: Cyrus Lien <cyrus.l...@canonical.com> > > > --- > > > drivers/gpu/drm/drm_edid.c | 6 ++++++ > > > 1 file changed, 6 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > > > index fed653f13c26..23878320eabd 100644 > > > --- a/drivers/gpu/drm/drm_edid.c > > > +++ b/drivers/gpu/drm/drm_edid.c > > > @@ -2674,6 +2674,9 @@ mode_in_hsync_range(const struct drm_display_mode > > *mode, > > > hmax += ((t[4] & 0x08) ? 255 : 0); > > > hsync = drm_mode_hsync(mode); > > > > > > + if (hmax == hmin) > > > + return (hsync <= hmax); > > > + > > > return (hsync <= hmax && hsync >= hmin); > > > } > > > > > > @@ -2691,6 +2694,9 @@ mode_in_vsync_range(const struct drm_display_mode > > *mode, > > > vmax += ((t[4] & 0x02) ? 255 : 0); > > > vsync = drm_mode_vrefresh(mode); > > > > > > + if (vmax == vmin) > > > + return (vsync <= vmax); > > > + > > > return (vsync <= vmax && vsync >= vmin); > > > } > > > > > > -- > > > 2.25.1 > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > -- > > Ville Syrjälä > > Intel > > -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
