From: Edmund Dea <edmund.j....@intel.com>
Note that we enable clk_msscam but do not set clk_msscam. However, we do
enable and set clk_mipi_ecfg and clk_mipi_cfg.
Verify that LCD and MIPI clocks are set successfully.
Signed-off-by: Edmund Dea <edmund.j....@intel.com>
---
drivers/gpu/drm/kmb/kmb_drv.c | 112 +++++++++++++++++++++++++++++++++++++-----
drivers/gpu/drm/kmb/kmb_drv.h | 2 +
2 files changed, 102 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index 0588bd0..48c2b28 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -56,6 +56,9 @@ static irqreturn_t kmb_isr(int irq, void *arg);
static struct clk *clk_lcd;
static struct clk *clk_mipi;
+static struct clk *clk_msscam;
+static struct clk *clk_mipi_ecfg;
+static struct clk *clk_mipi_cfg;
struct drm_bridge *adv_bridge;
@@ -74,6 +77,24 @@ static int kmb_display_clk_enable(void)
DRM_ERROR("Failed to enable MIPI clock: %d\n", ret);
return ret;
}
+
+ ret = clk_prepare_enable(clk_msscam);
+ if (ret) {
+ DRM_ERROR("Failed to enable MSSCAM clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(clk_mipi_ecfg);
+ if (ret) {
+ DRM_ERROR("Failed to enable MIPI_ECFG clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(clk_mipi_cfg);
+ if (ret) {
+ DRM_ERROR("Failed to enable MIPI_CFG clock: %d\n", ret);
+ return ret;
+ }
DRM_INFO("SUCCESS : enabled LCD MIPI clocks\n");
return 0;
}
@@ -84,6 +105,12 @@ static int kmb_display_clk_disable(void)
clk_disable_unprepare(clk_lcd);
if (clk_mipi)
clk_disable_unprepare(clk_mipi);
+ if (clk_msscam)
+ clk_disable_unprepare(clk_msscam);
+ if (clk_mipi_ecfg)
+ clk_disable_unprepare(clk_mipi_ecfg);
+ if (clk_mipi_cfg)
+ clk_disable_unprepare(clk_mipi_cfg);
return 0;
}
@@ -118,6 +145,7 @@ static int kmb_load(struct drm_device *drm, unsigned long
flags)
struct platform_device *pdev = to_platform_device(drm->dev);
/*u32 version;*/
int ret = 0;
+ unsigned long clk;
/* Map LCD MMIO registers */
dev_p->lcd_mmio = kmb_map_mmio(pdev, "lcd_regs");
@@ -128,7 +156,6 @@ static int kmb_load(struct drm_device *drm, unsigned long
flags)
/* Map MIPI MMIO registers */
dev_p->mipi_mmio = kmb_map_mmio(pdev, "mipi_regs");
-
if (IS_ERR(dev_p->mipi_mmio)) {
DRM_ERROR("failed to map MIPI registers\n");
iounmap(dev_p->lcd_mmio);
@@ -146,33 +173,94 @@ static int kmb_load(struct drm_device *drm, unsigned long
flags)
return -ENOMEM;
}
- /* enable display clocks*/
+ /* Enable display clocks*/
clk_lcd = clk_get(&pdev->dev, "clk_lcd");
- if (!clk_lcd) {
+ if (IS_ERR(clk_lcd)) {
DRM_ERROR("clk_get() failed clk_lcd\n");
goto setup_fail;
}
- DRM_INFO("%s : %d\n", __func__, __LINE__);
clk_mipi = clk_get(&pdev->dev, "clk_mipi");
- if (!clk_mipi) {
+ if (IS_ERR(clk_mipi)) {
DRM_ERROR("clk_get() failed clk_mipi\n");
goto setup_fail;
}
- DRM_INFO("%s : %d\n", __func__, __LINE__);
+
+ clk_msscam = clk_get(&pdev->dev, "clk_msscam");
+ if (IS_ERR(clk_msscam)) {
+ DRM_ERROR("clk_get() failed clk_msscam\n");
+ goto setup_fail;
+ }
+
+ clk_mipi_ecfg = clk_get(&pdev->dev, "clk_mipi_ecfg");
+ if (IS_ERR(clk_mipi_ecfg)) {
+ DRM_ERROR("clk_get() failed clk_mipi_ecfg\n");
+ goto setup_fail;
+ }
+
+ clk_mipi_cfg = clk_get(&pdev->dev, "clk_mipi_cfg");
+ if (IS_ERR(clk_mipi_cfg)) {
+ DRM_ERROR("clk_get() failed clk_mipi_cfg\n");
+ goto setup_fail;
+ }
+
ret = kmb_display_clk_enable();
- /* set LCD clock to 200 Mhz*/
+ /* Set LCD clock to 200 Mhz*/
DRM_INFO("Get clk_lcd before set = %ld\n", clk_get_rate(clk_lcd));
- ret = clk_set_rate(clk_lcd, 200000000);
- DRM_INFO("Setting LCD clock tp 200Mhz ret = %d\n", ret);
+ ret = clk_set_rate(clk_lcd, KMB_LCD_DEFAULT_CLK);
+ if (clk_get_rate(clk_lcd) != KMB_LCD_DEFAULT_CLK) {
+ DRM_ERROR("failed to set to clk_lcd to %d\n",
+ KMB_LCD_DEFAULT_CLK);
+ goto setup_fail;
+ }
+ DRM_INFO("Setting LCD clock to %d Mhz ret = %d\n",
+ KMB_LCD_DEFAULT_CLK/1000000, ret);
DRM_INFO("Get clk_lcd after set = %ld\n", clk_get_rate(clk_lcd));
- /* set MIPI clock to 24 Mhz*/
+
+ /* Set MIPI clock to 24 Mhz*/
DRM_INFO("Get clk_mipi before set = %ld\n", clk_get_rate(clk_mipi));
- ret = clk_set_rate(clk_mipi, 24000000);
- DRM_INFO("Setting MIPI clock tp 24Mhz ret = %d\n", ret);
+ ret = clk_set_rate(clk_mipi, KMB_MIPI_DEFAULT_CLK);
+ if (clk_get_rate(clk_mipi) != KMB_MIPI_DEFAULT_CLK) {
+ DRM_ERROR("failed to set to clk_mipi to %d\n",
+ KMB_MIPI_DEFAULT_CLK);
+ goto setup_fail;
+ }
+ DRM_INFO("Setting MIPI clock to %d Mhz ret = %d\n",
+ KMB_MIPI_DEFAULT_CLK/1000000, ret);
DRM_INFO("Get clk_mipi after set = %ld\n", clk_get_rate(clk_mipi));
+ clk = clk_get_rate(clk_mipi_ecfg);
+ if (clk != KMB_MIPI_DEFAULT_CLK) {
+ /* Set MIPI_ECFG clock to 24 Mhz*/
+ DRM_INFO("Get clk_mipi_ecfg before set = %ld\n", clk);
+ ret = clk_set_rate(clk_mipi_ecfg, KMB_MIPI_DEFAULT_CLK);
+ clk = clk_get_rate(clk_mipi_ecfg);
+ if (clk != KMB_MIPI_DEFAULT_CLK) {
+ DRM_ERROR("failed to set to clk_mipi_ecfg to %d\n",
+ KMB_MIPI_DEFAULT_CLK);
+ goto setup_fail;
+ }
+ DRM_INFO("Setting MIPI_ECFG clock tp %d Mhz ret = %d\n",
+ KMB_MIPI_DEFAULT_CLK/1000000, ret);
+ DRM_INFO("Get clk_mipi_ecfg after set = %ld\n", clk);
+ }
+
+ clk = clk_get_rate(clk_mipi_cfg);
+ if (clk != KMB_MIPI_DEFAULT_CLK) {
+ /* Set MIPI_CFG clock to 24 Mhz*/
+ DRM_INFO("Get clk_mipi_cfg before set = %ld\n", clk);
+ ret = clk_set_rate(clk_mipi_cfg, 24000000);
+ clk = clk_get_rate(clk_mipi_cfg);
+ if (clk != KMB_MIPI_DEFAULT_CLK) {
+ DRM_ERROR("failed to set to clk_mipi_cfg to %d\n",
+ KMB_MIPI_DEFAULT_CLK);
+ goto setup_fail;
+ }
+ DRM_INFO("Setting MIPI_CFG clock tp 24Mhz ret = %d\n", ret);
+ DRM_INFO("Get clk_mipi_cfg after set = %ld\n", clk);
+ }
+
#ifdef WIP
/* Register irqs here - section 17.3 in databook
* lists LCD at 79 and 82 for MIPI under MSS CPU -
diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h
index 6c1d687..9e3bb83 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.h
+++ b/drivers/gpu/drm/kmb/kmb_drv.h
@@ -30,6 +30,8 @@
#define KMB_MAX_WIDTH 16384 /*max width in pixels */
#define KMB_MAX_HEIGHT 16384 /*max height in pixels */
+#define KMB_LCD_DEFAULT_CLK 200000000
+#define KMB_MIPI_DEFAULT_CLK 24000000
struct kmb_drm_private {
struct drm_device drm;
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
