add write_s function in cmdq helper functions which
writes value contains in internal register to address
with large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hs...@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   |   19 +++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |    1 +
 include/linux/soc/mediatek/mtk-cmdq.h    |   19 +++++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c 
b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 9faf78fbed3a..880349b3f16c 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -18,6 +18,10 @@ struct cmdq_instruction {
        union {
                u32 value;
                u32 mask;
+               struct {
+                       u16 arg_c;
+                       u16 src_reg;
+               };
        };
        union {
                u16 offset;
@@ -223,6 +227,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+                    u16 addr_low, u16 src_reg_idx)
+{
+       struct cmdq_instruction inst = {};
+
+       inst.op = CMDQ_CODE_WRITE_S;
+       inst.src_t = CMDQ_REG_TYPE;
+       inst.sop = high_addr_reg_idx;
+       inst.offset = addr_low;
+       inst.src_reg = src_reg_idx;
+
+       return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
        struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h 
b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 05eea1aef5aa..1f76cfedb16d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
        CMDQ_CODE_JUMP = 0x10,
        CMDQ_CODE_WFE = 0x20,
        CMDQ_CODE_EOC = 0x40,
+       CMDQ_CODE_WRITE_S = 0x90,
        CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h 
b/include/linux/soc/mediatek/mtk-cmdq.h
index 2249ecaf77e4..9b0c57a0063d 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@
 #include <linux/timer.h>
 
 #define CMDQ_NO_TIMEOUT                0xffffffffu
+#define CMDQ_ADDR_HIGH(addr)   ((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr)    ((u16)(addr) | BIT(1))
 
 struct cmdq_pkt;
 
@@ -103,6 +105,23 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
                        u16 offset, u32 value, u32 mask);
 
 /**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt:       the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low:  low address of pa
+ * @src_reg_idx:       the CMDQ internal register ID which cache source value
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+                    u16 addr_low, u16 src_reg_idx);
+
+/**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:       the CMDQ packet
  * @event:     the desired event type to "wait and CLEAR"
-- 
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to