From: Antonio Borneo <antonio.bor...@st.com>
Current code only sends LP commands in command mode.
Allows sending LP commands also in video mode by setting the
proper flag in DSI_VID_MODE_CFG.
Signed-off-by: Antonio Borneo <antonio.bor...@st.com>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 1a24ea648ef8..e9a0f42ff99f 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -89,6 +89,7 @@
#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
#define VID_MODE_TYPE_BURST 0x2
#define VID_MODE_TYPE_MASK 0x3
+#define ENABLE_LOW_POWER_CMD BIT(15)
#define VID_MODE_VPG_ENABLE BIT(16)
#define VID_MODE_VPG_HORIZONTAL BIT(24)
@@ -376,6 +377,13 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+
+ val = dsi_read(dsi, DSI_VID_MODE_CFG);
+ if (lpm)
+ val |= ENABLE_LOW_POWER_CMD;
+ else
+ val &= ~ENABLE_LOW_POWER_CMD;
+ dsi_write(dsi, DSI_VID_MODE_CFG, val);
}
static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
