Hi Sebastian,
Thank you for the patch.
On Tue, Jun 30, 2020 at 12:33:13AM +0200, Sebastian Reichel wrote:
> The standard binding for DSI requires, that the channel number
s/requires,/requires/
> of the panel is encoded in DT. This adds the channel number in
> all OMAP3-5 boards, in preparation for using common infrastructure.
>
> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> ---
> arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++-
> arch/arm/boot/dts/omap3-n950.dts | 3 ++-
> arch/arm/boot/dts/omap3.dtsi | 3 +++
> arch/arm/boot/dts/omap4-sdp.dts | 6 ++++--
> arch/arm/boot/dts/omap4.dtsi | 6 ++++++
> arch/arm/boot/dts/omap5.dtsi | 6 ++++++
> 6 files changed, 23 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
> b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
> index 06fbffa81636..4ffe461c3808 100644
> --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
> +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
> @@ -207,8 +207,9 @@ dsi1_out_ep: endpoint {
> };
> };
>
> - lcd0: display {
> + lcd0: panel@0 {
> compatible = "panel-dsi-cm";
> + reg = <0>;
> label = "lcd0";
> vddi-supply = <&lcd_regulator>;
> reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
> diff --git a/arch/arm/boot/dts/omap3-n950.dts
> b/arch/arm/boot/dts/omap3-n950.dts
> index 31d47a1fad84..80cf4e1177da 100644
> --- a/arch/arm/boot/dts/omap3-n950.dts
> +++ b/arch/arm/boot/dts/omap3-n950.dts
> @@ -225,8 +225,9 @@ dsi_out_ep: endpoint {
> };
> };
>
> - lcd0: display {
> + lcd0: panel@0 {
> compatible = "nokia,himalaya", "panel-dsi-cm";
> + reg = <0>;
> label = "lcd0";
>
> pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 1296d0643943..0ebbb6c11f04 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -898,6 +898,9 @@ dsi: encoder@4804fc00 {
> ti,hwmods = "dss_dsi1";
> clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
> clock-names = "fck", "sys_clk";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
>
> rfbi: encoder@48050800 {
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 91480ac1f328..8a8307517dab 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint {
> };
> };
>
> - lcd0: display {
> + lcd0: panel@0 {
> compatible = "tpo,taal", "panel-dsi-cm";
> + reg = <0>;
> label = "lcd0";
>
> reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
> @@ -687,8 +688,9 @@ dsi2_out_ep: endpoint {
> };
> };
>
> - lcd1: display {
> + lcd1: panel@0 {
> compatible = "tpo,taal", "panel-dsi-cm";
> + reg = <0>;
> label = "lcd1";
>
> reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 4400f5f8e099..c5b426616443 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -551,6 +551,9 @@ dsi1: encoder@0 {
> clocks = <&l3_dss_clkctrl
> OMAP4_DSS_CORE_CLKCTRL 8>,
> <&l3_dss_clkctrl
> OMAP4_DSS_CORE_CLKCTRL 10>;
> clock-names = "fck", "sys_clk";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
> };
>
> @@ -583,6 +586,9 @@ dsi2: encoder@0 {
> clocks = <&l3_dss_clkctrl
> OMAP4_DSS_CORE_CLKCTRL 8>,
> <&l3_dss_clkctrl
> OMAP4_DSS_CORE_CLKCTRL 10>;
> clock-names = "fck", "sys_clk";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index fb889c5b00c9..0855c0a4050f 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -491,6 +491,9 @@ dsi1: encoder@0 {
> status = "disabled";
> clocks = <&dss_clkctrl
> OMAP5_DSS_CORE_CLKCTRL 8>;
> clock-names = "fck";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
> };
>
> @@ -522,6 +525,9 @@ dsi2: encoder@0 {
> status = "disabled";
> clocks = <&dss_clkctrl
> OMAP5_DSS_CORE_CLKCTRL 8>;
> clock-names = "fck";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
> };
>
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
