Convert panel-dsi-cm bindings to YAML and add missing properties while at it.
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> Reviewed-by: Rob Herring <r...@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com> --- .../bindings/display/panel/panel-dsi-cm.txt | 29 ------- .../bindings/display/panel/panel-dsi-cm.yaml | 86 +++++++++++++++++++ 2 files changed, 86 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt create mode 100644 Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt deleted file mode 100644 index dce48eb9db57..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Generic MIPI DSI Command Mode Panel -=================================== - -Required properties: -- compatible: "panel-dsi-cm" - -Optional properties: -- label: a symbolic name for the panel -- reset-gpios: panel reset gpio -- te-gpios: panel TE gpio - -Required nodes: -- Video port for DSI input - -Example -------- - -lcd0: display { - compatible = "tpo,taal", "panel-dsi-cm"; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml new file mode 100644 index 000000000000..d766c949c622 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DSI command mode panels + +maintainers: + - Tomi Valkeinen <tomi.valkei...@ti.com> + - Sebastian Reichel <s...@kernel.org> + +description: | + This binding file is a collection of the DSI panels that + are usually driven in command mode. If no backlight is + referenced via the optional backlight property, the DSI + panel is assumed to have native backlight support. + The panel may use an OF graph binding for the association + to the display, or it may be a direct child node of the + display. + +allOf: + - $ref: panel-common.yaml# + +properties: + + compatible: + items: + - enum: + - motorola,droid4-panel # Panel from Motorola Droid4 phone + - nokia,himalaya # Panel from Nokia N950 phone + - tpo,taal # Panel from OMAP4 SDP board + - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the vddi-supply property specifies the supply powering the panel as a + phandle to a regulator. + + vpnl-supply: + description: + When the display panel needs a second power supply, this property can be + used in addition to vddi-supply. Both supplies will be enabled at the + same time before the panel is being accessed. + + width-mm: true + height-mm: true + label: true + rotation: true + panel-timing: true + port: true + reset-gpios: true + te-gpios: true + backlight: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi-controller { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tpo,taal", "panel-dsi-cm"; + reg = <0>; + reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; + }; + +... -- 2.27.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel