On Wed, 29 Jul 2020 at 15:42, Maxime Ripard <max...@cerno.tech> wrote: > > Hi, > > On Wed, Jul 29, 2020 at 03:09:21PM +0100, Dave Stevenson wrote: > > On Wed, 8 Jul 2020 at 18:43, Maxime Ripard <max...@cerno.tech> wrote: > > > > > > In order to avoid pixels getting stuck in the (unflushable) FIFO between > > > the HVS and the PV, we need to add some delay after disabling the PV > > > output > > > and before disabling the HDMI controller. 20ms seems to be good enough so > > > let's use that. > > > > > > Signed-off-by: Maxime Ripard <max...@cerno.tech> > > > --- > > > drivers/gpu/drm/vc4/vc4_crtc.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c > > > b/drivers/gpu/drm/vc4/vc4_crtc.c > > > index d0b326e1df0a..7b178d67187f 100644 > > > --- a/drivers/gpu/drm/vc4/vc4_crtc.c > > > +++ b/drivers/gpu/drm/vc4/vc4_crtc.c > > > @@ -403,6 +403,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc > > > *crtc, > > > ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1); > > > WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n"); > > > > > > + mdelay(20); > > > > mdelay for 20ms seems a touch unfriendly as it's a busy wait. Can we > > not msleep instead? > > Since the timing was fairly critical, sleeping didn't seem like a good > solution since there's definitely some chance you overshoot and end up > with a higher time than the one you targeted.
Fair enough. I know timing is "entertaining" around some of the 2711 pipeline setup. Reviewed-by: Dave Stevenson <dave.steven...@raspberrypi.com> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
