Hi Dmitry,
I add the minor comment. Except of some comments, it looks good to me.
On 8/14/20 9:05 AM, Dmitry Osipenko wrote:
> The clk_round_rate() won't be usable for building OPP table once
> interconnect support will be added to the EMC driver because that CLK API
> function limits the rounded rate based on the clk rate that is imposed by
> active clk-users, and thus, the rounding won't work as expected if
> interconnect will set the minimum EMC clock rate before devfreq driver is
> loaded. The struct tegra_mc contains memory timings which could be used by
> the devfreq driver for building up OPP table instead of rounding clock
> rate, this patch implements this idea.
>
> Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
> ---
> drivers/devfreq/tegra30-devfreq.c | 93 +++++++++++++++++++++----------
> 1 file changed, 65 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/devfreq/tegra30-devfreq.c
> b/drivers/devfreq/tegra30-devfreq.c
> index 423dd35c95b3..6c2f56b34535 100644
> --- a/drivers/devfreq/tegra30-devfreq.c
> +++ b/drivers/devfreq/tegra30-devfreq.c
> @@ -19,6 +19,8 @@
> #include <linux/reset.h>
> #include <linux/workqueue.h>
>
> +#include <soc/tegra/mc.h>
> +
> #include "governor.h"
>
> #define ACTMON_GLB_STATUS 0x0
> @@ -153,6 +155,18 @@ struct tegra_devfreq_device {
> unsigned long target_freq;
> };
>
> +struct tegra_devfreq_soc_data {
> + const char *mc_compatible;
> +};
> +
> +static const struct tegra_devfreq_soc_data tegra30_soc = {
> + .mc_compatible = "nvidia,tegra30-mc",
> +};
> +
> +static const struct tegra_devfreq_soc_data tegra124_soc = {
> + .mc_compatible = "nvidia,tegra124-mc",
> +};
> +
> struct tegra_devfreq {
> struct devfreq *devfreq;
>
> @@ -771,15 +785,49 @@ static struct devfreq_governor tegra_devfreq_governor =
> {
> .interrupt_driven = true,
> };
>
> +static struct tegra_mc *tegra_get_memory_controller(const char *compatible)
> +{
> + struct platform_device *pdev;
> + struct device_node *np;
> + struct tegra_mc *mc;
> +
> + np = of_find_compatible_node(NULL, NULL, compatible);
> + if (!np)
> + return ERR_PTR(-ENOENT);
> +
> + pdev = of_find_device_by_node(np);
> + of_node_put(np);
> + if (!pdev)
> + return ERR_PTR(-ENODEV);
> +
> + mc = platform_get_drvdata(pdev);
> + if (!mc)
> + return ERR_PTR(-EPROBE_DEFER);
> +
> + return mc;
> +}
> +
> static int tegra_devfreq_probe(struct platform_device *pdev)
> {
> + const struct tegra_devfreq_soc_data *soc_data;
> struct tegra_devfreq_device *dev;
> struct tegra_devfreq *tegra;
> struct devfreq *devfreq;
> + struct tegra_mc *mc;
> unsigned int i;
> - long rate;
> int err;
>
> + soc_data = of_device_get_match_data(&pdev->dev);
I think that better to check whether 'soc_data' is not NULL.
> +
> + mc = tegra_get_memory_controller(soc_data->mc_compatible);
> + if (IS_ERR(mc))
> + return PTR_ERR(mc);
You better to add error log.
> +
> + if (!mc->num_timings) {
> + dev_info(&pdev->dev, "memory controller has no timings\n");
> + return -ENODEV;
> + }
> +
> tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
> if (!tegra)
> return -ENOMEM;
> @@ -825,6 +873,20 @@ static int tegra_devfreq_probe(struct platform_device
> *pdev)
> return err;
> }
>
> + for (i = 0; i < mc->num_timings; i++) {
> + /*
> + * Memory Controller timings are sorted in ascending clock
> + * rate order, so the last timing will be the max freq.
> + */
> + tegra->max_freq = mc->timings[i].rate / KHZ;
> +
> + err = dev_pm_opp_add(&pdev->dev, tegra->max_freq, 0);
> + if (err) {
> + dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
> + goto remove_opps;
> + }
> + }
> +
> reset_control_assert(tegra->reset);
>
> err = clk_prepare_enable(tegra->clock);
> @@ -836,37 +898,12 @@ static int tegra_devfreq_probe(struct platform_device
> *pdev)
>
> reset_control_deassert(tegra->reset);
>
> - rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
> - if (rate < 0) {
> - dev_err(&pdev->dev, "Failed to round clock rate: %ld\n", rate);
> - return rate;
> - }
> -
> - tegra->max_freq = rate / KHZ;
> -
> for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
> dev = tegra->devices + i;
> dev->config = actmon_device_configs + i;
> dev->regs = tegra->regs + dev->config->offset;
> }
>
> - for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
> - rate = clk_round_rate(tegra->emc_clock, rate);
> -
> - if (rate < 0) {
> - dev_err(&pdev->dev,
> - "Failed to round clock rate: %ld\n", rate);
> - err = rate;
> - goto remove_opps;
> - }
> -
> - err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0);
> - if (err) {
> - dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
> - goto remove_opps;
> - }
> - }
> -
> platform_set_drvdata(pdev, tegra);
>
> tegra->clk_rate_change_nb.notifier_call = tegra_actmon_clk_notify_cb;
> @@ -921,8 +958,8 @@ static int tegra_devfreq_remove(struct platform_device
> *pdev)
> }
>
> static const struct of_device_id tegra_devfreq_of_match[] = {
> - { .compatible = "nvidia,tegra30-actmon" },
> - { .compatible = "nvidia,tegra124-actmon" },
> + { .compatible = "nvidia,tegra30-actmon", .data = &tegra30_soc, },
> + { .compatible = "nvidia,tegra124-actmon", .data = &tegra124_soc, },
> { },
> };
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
