On Mon, Jun 15, 2020 at 10:53:19PM +0200, Enric Balletbo i Serra wrote:
> Print an error message inside ps8640_bridge_vdo_control() function when
> it fails so we can simplify a bit the callers, they will only need to
> check the error code.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>

> ---
> 
>  drivers/gpu/drm/bridge/parade-ps8640.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c 
> b/drivers/gpu/drm/bridge/parade-ps8640.c
> index ce3e8b2da8c9b..9f7b7a9c53c52 100644
> --- a/drivers/gpu/drm/bridge/parade-ps8640.c
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -82,8 +82,11 @@ static int ps8640_bridge_vdo_control(struct ps8640 
> *ps_bridge,
>       ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
>                                            sizeof(vdo_ctrl_buf),
>                                            vdo_ctrl_buf);
> -     if (ret < 0)
> +     if (ret < 0) {
> +             DRM_ERROR("failed to %sable VDO: %d\n",
> +                       ctrl == ENABLE ? "en" : "dis", ret);
>               return ret;
> +     }
>  
>       return 0;
>  }
> @@ -150,10 +153,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge)
>       }
>  
>       ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE);
> -     if (ret) {
> -             DRM_ERROR("failed to enable VDO: %d\n", ret);
> +     if (ret)
>               goto err_regulators_disable;
> -     }
>  
>       /* Switch access edp panel's edid through i2c */
>       ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
> @@ -175,9 +176,7 @@ static void ps8640_post_disable(struct drm_bridge *bridge)
>       struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
>       int ret;
>  
> -     ret = ps8640_bridge_vdo_control(ps_bridge, DISABLE);
> -     if (ret < 0)
> -             DRM_ERROR("failed to disable VDO: %d\n", ret);
> +     ps8640_bridge_vdo_control(ps_bridge, DISABLE);
>  
>       gpiod_set_value(ps_bridge->gpio_reset, 1);
>       gpiod_set_value(ps_bridge->gpio_powerdown, 1);
> -- 
> 2.27.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to