From: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
This patch adds HDMI device nodes for R-Car M3-W+ (r8a77961) SoC.
This patch was tested on R-Car M3-W+ Salvator-XS board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77961.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index c7fabd9e875b..7f21491f6436 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -2145,14 +2145,23 @@ port@1 {
};
hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a77961-hdmi",
"renesas,rcar-gen3-hdmi";
reg = <0 0xfead0000 0 0x10000>;
- /* placeholder */
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE
R8A77961_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint =
<&du_out_hdmi0>;
+ };
};
port@1 {
reg = <1>;
@@ -2191,6 +2200,7 @@ du_out_rgb: endpoint {
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint =
<&dw_hdmi0_in>;
};
};
port@2 {
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
