On Mon, Sep 14, 2020 at 07:14:11PM +0900, Hoegeun Kwon wrote: > Hi Maxime, > > On 9/8/20 9:00 PM, Maxime Ripard wrote: > > Hi Hoegeun, > > > > On Mon, Sep 07, 2020 at 08:49:12PM +0900, Hoegeun Kwon wrote: > >> On 9/3/20 5:00 PM, Maxime Ripard wrote: > >>> Hi everyone, > >>> > >>> Here's a (pretty long) series to introduce support in the VC4 DRM driver > >>> for the display pipeline found in the BCM2711 (and thus the RaspberryPi > >>> 4). > >>> > >>> The main differences are that there's two HDMI controllers and that > >>> there's > >>> more pixelvalve now. Those pixelvalve come with a mux in the HVS that > >>> still > >>> have only 3 FIFOs. Both of those differences are breaking a bunch of > >>> expectations in the driver, so we first need a good bunch of cleanup and > >>> reworks to introduce support for the new controllers. > >>> > >>> Similarly, the HDMI controller has all its registers shuffled and split in > >>> multiple controllers now, so we need a bunch of changes to support this as > >>> well. > >>> > >>> Only the HDMI support is enabled for now (even though the DPI and DSI > >>> outputs have been tested too). > >>> > >>> Let me know if you have any comments > >>> Maxime > >>> > >>> Cc: bcm-kernel-feedback-l...@broadcom.com > >>> Cc: devicet...@vger.kernel.org > >>> Cc: Kamal Dasu <kdasu.k...@gmail.com> > >>> Cc: Philipp Zabel <p.za...@pengutronix.de> > >>> Cc: Rob Herring <robh...@kernel.org> > >>> Cc: Stephen Boyd <sb...@kernel.org> > >>> > >>> Changes from v4: > >>> - Rebased on top of next-20200828 > >>> - Collected the various tags > >>> - Fixed some issues with 4k support and dual output (thanks Hoegeun!) > >> Thanks for your v5 patchset. > >> > >> I tested all patches based on the next-20200812. > > Thanks again for testing all the patches > > > >> Everything else is fine, but the dual hdmi modetest doesn't work well in my > >> environment... > >> > >> In my environment, dsi is not connected, I have seen your answer[1]. > > Can you share a bit more your setup? What monitors are being connected > > to each HDMI port? Do you hotplug any? > Yes, Monitors are being connected to each HDMI ports. (did not use hotplug) > > When booting, both HDMI-0 and 1 are recognized and the kernel log is output. > But after run modetest on HDMI-0(works) and modetest on HDMI-1(works), > crtc timed out occurs on HDMI-0 and does not work. > > When HDMI-0 is not working we do a modetest on HDMI-0, it will work agin > after about 40 sec. > > Below is the log for modetest. > > > root:~> modetest -Mvc4 -s 32:1280x720 - HDMI-0 works > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > failed to set gamma: Invalid argument > > root:~> modetest -Mvc4 -s 32:1280x720 - HDMI-0 works > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > failed to set gamma: Invalid argument > > root:~> modetest -Mvc4 -s 38:1280x720 - HDMI-1 works > setting mode 1280x720-60Hz@XR24 on connectors 38, crtc 69 > failed to set gamma: Invalid argument > > - Crtc timed out occurs on HDMI-0 and > does not work. > > [ 71.134283] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > [ 81.374296] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > [ 91.618380] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CONNECTOR:32:HDMI-A-1] flip_done timed out > [ 101.854274] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [PLANE:60:plane-3] flip_done timed out > > [ 112.094271] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > [ 122.590311] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > > root:~> modetest -Mvc4 -s 32:1280x720 > [ 132.830309] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CONNECTOR:32:HDMI-A-1] flip_done timed out > [ 143.070307] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [PLANE:60:plane-3] flip_done timed out > [ 153.310303] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > setting mode 1280x720-60Hz@XR24 on connectors 32, crtc 64 > [ 163.550340] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CRTC:64:crtc-3] flip_done timed out > [ 173.790277] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [CONNECTOR:32:HDMI-A-1] flip_done timed out > [ 184.030286] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* > [PLANE:60:plane-3] flip_done timed out > failed to set gamma: Invalid argument - HDMI-0 works
Thanks :) I was able to reproduce it just by also letting X boot. I'm on a good path to fix it and found a workaround. I'll send you the patch in the upcoming days :) Thanks again, Maxime
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
