From: Antonio Borneo <antonio.bor...@st.com>

The panel is able to receive commands in LP. The current hack to
force backlight commands in HS was due to workaround an incorrect
settings on DSI controller that prevents sending LP commands while
video out was active.

Remove the hack that forces HS commands.

Signed-off-by: Antonio Borneo <antonio.bor...@st.com>
---
 .../gpu/drm/panel/panel-orisetech-otm8009a.c   | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c 
b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 6ac1accade80..f80b44a8a700 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -99,20 +99,6 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, 
const void *data,
                dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n");
 }
 
-static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data,
-                                     size_t len)
-{
-       struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-
-       /* data will be sent in dsi hs mode (ie. no lpm) */
-       dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
-
-       otm8009a_dcs_write_buf(ctx, data, len);
-
-       /* restore back the dsi lpm mode */
-       dsi->mode_flags |= MIPI_DSI_MODE_LPM;
-}
-
 #define dcs_write_seq(ctx, seq...)                     \
 ({                                                     \
        static const u8 d[] = { seq };                  \
@@ -400,7 +386,7 @@ static int otm8009a_backlight_update_status(struct 
backlight_device *bd)
                 */
                data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
                data[1] = bd->props.brightness;
-               otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
+               otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
 
                /* set Brightness Control & Backlight on */
                data[1] = 0x24;
@@ -412,7 +398,7 @@ static int otm8009a_backlight_update_status(struct 
backlight_device *bd)
 
        /* Update Brightness Control & Backlight */
        data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
-       otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
+       otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
 
        return 0;
 }
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to