Hi Tomi

On Thu, Nov 05, 2020 at 02:02:39PM +0200, Tomi Valkeinen wrote:
> From: Sebastian Reichel <sebastian.reic...@collabora.com>
> 
> This reverts commit 4ff8e98879e6eeae9d125dfcf3b642075d00089d.

Please use proper commit reference like:
2f62f4990dca ("gpu: drm: bridge: bla bla)

The above commit-id does not exist in my drm-misc-next tree.

        Sam

> 
> This is still needed by DSI. E.g. unloading modules without this will
> cause a crash.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> ---
>  drivers/gpu/drm/omapdrm/dss/base.c     | 26 +++++++++++++++
>  drivers/gpu/drm/omapdrm/dss/omapdss.h  |  6 ++++
>  drivers/gpu/drm/omapdrm/omap_encoder.c | 44 +++++++++++++++++++++++---
>  3 files changed, 71 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/base.c 
> b/drivers/gpu/drm/omapdrm/dss/base.c
> index c7650a7c155d..455b410f7401 100644
> --- a/drivers/gpu/drm/omapdrm/dss/base.c
> +++ b/drivers/gpu/drm/omapdrm/dss/base.c
> @@ -234,6 +234,18 @@ void omapdss_device_disconnect(struct omap_dss_device 
> *src,
>  }
>  EXPORT_SYMBOL_GPL(omapdss_device_disconnect);
>  
> +void omapdss_device_pre_enable(struct omap_dss_device *dssdev)
> +{
> +     if (!dssdev)
> +             return;
> +
> +     omapdss_device_pre_enable(dssdev->next);
> +
> +     if (dssdev->ops && dssdev->ops->pre_enable)
> +             dssdev->ops->pre_enable(dssdev);
> +}
> +EXPORT_SYMBOL_GPL(omapdss_device_pre_enable);
> +
>  void omapdss_device_enable(struct omap_dss_device *dssdev)
>  {
>       if (!dssdev)
> @@ -260,6 +272,20 @@ void omapdss_device_disable(struct omap_dss_device 
> *dssdev)
>  }
>  EXPORT_SYMBOL_GPL(omapdss_device_disable);
>  
> +void omapdss_device_post_disable(struct omap_dss_device *dssdev)
> +{
> +     if (!dssdev)
> +             return;
> +
> +     if (dssdev->ops && dssdev->ops->post_disable)
> +             dssdev->ops->post_disable(dssdev);
> +
> +     omapdss_device_post_disable(dssdev->next);
> +
> +     dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
> +}
> +EXPORT_SYMBOL_GPL(omapdss_device_post_disable);
> +
>  /* 
> -----------------------------------------------------------------------------
>   * Components Handling
>   */
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h 
> b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> index ab19d4af8de7..cbbe10b2b60d 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -342,11 +342,15 @@ struct omap_dss_device_ops {
>       void (*disconnect)(struct omap_dss_device *dssdev,
>                       struct omap_dss_device *dst);
>  
> +     void (*pre_enable)(struct omap_dss_device *dssdev);
>       void (*enable)(struct omap_dss_device *dssdev);
>       void (*disable)(struct omap_dss_device *dssdev);
> +     void (*post_disable)(struct omap_dss_device *dssdev);
>  
>       int (*check_timings)(struct omap_dss_device *dssdev,
>                            struct drm_display_mode *mode);
> +     void (*set_timings)(struct omap_dss_device *dssdev,
> +                         const struct drm_display_mode *mode);
>  
>       int (*get_modes)(struct omap_dss_device *dssdev,
>                        struct drm_connector *connector);
> @@ -445,8 +449,10 @@ int omapdss_device_connect(struct dss_device *dss,
>                          struct omap_dss_device *dst);
>  void omapdss_device_disconnect(struct omap_dss_device *src,
>                              struct omap_dss_device *dst);
> +void omapdss_device_pre_enable(struct omap_dss_device *dssdev);
>  void omapdss_device_enable(struct omap_dss_device *dssdev);
>  void omapdss_device_disable(struct omap_dss_device *dssdev);
> +void omapdss_device_post_disable(struct omap_dss_device *dssdev);
>  
>  int omap_dss_get_num_overlay_managers(void);
>  
> diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c 
> b/drivers/gpu/drm/omapdrm/omap_encoder.c
> index ae4b867a67a3..18a79dde6815 100644
> --- a/drivers/gpu/drm/omapdrm/omap_encoder.c
> +++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
> @@ -113,8 +113,13 @@ static void omap_encoder_mode_set(struct drm_encoder 
> *encoder,
>       bus_flags = connector->display_info.bus_flags;
>       omap_encoder_update_videomode_flags(&vm, bus_flags);
>  
> -     /* Set timings for the dss manager. */
> +     /* Set timings for all devices in the display pipeline. */
>       dss_mgr_set_timings(output, &vm);
> +
> +     for (dssdev = output; dssdev; dssdev = dssdev->next) {
> +             if (dssdev->ops && dssdev->ops->set_timings)
> +                     dssdev->ops->set_timings(dssdev, adjusted_mode);
> +     }
>  }
>  
>  static void omap_encoder_disable(struct drm_encoder *encoder)
> @@ -127,10 +132,26 @@ static void omap_encoder_disable(struct drm_encoder 
> *encoder)
>  
>       /*
>        * Disable the chain of external devices, starting at the one at the
> -      * internal encoder's output. This is used for DSI outputs only, as
> -      * dssdev->next is NULL for all other outputs.
> +      * internal encoder's output.
>        */
>       omapdss_device_disable(dssdev->next);
> +
> +     /*
> +      * Disable the internal encoder. This will disable the DSS output. The
> +      * DSI is treated as an exception as DSI pipelines still use the legacy
> +      * flow where the pipeline output controls the encoder.
> +      */
> +     if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
> +             if (dssdev->ops && dssdev->ops->disable)
> +                     dssdev->ops->disable(dssdev);
> +             dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
> +     }
> +
> +     /*
> +      * Perform the post-disable operations on the chain of external devices
> +      * to complete the display pipeline disable.
> +      */
> +     omapdss_device_post_disable(dssdev->next);
>  }
>  
>  static void omap_encoder_enable(struct drm_encoder *encoder)
> @@ -141,10 +162,23 @@ static void omap_encoder_enable(struct drm_encoder 
> *encoder)
>  
>       dev_dbg(dev->dev, "enable(%s)\n", dssdev->name);
>  
> +     /* Prepare the chain of external devices for pipeline enable. */
> +     omapdss_device_pre_enable(dssdev->next);
> +
> +     /*
> +      * Enable the internal encoder. This will enable the DSS output. The
> +      * DSI is treated as an exception as DSI pipelines still use the legacy
> +      * flow where the pipeline output controls the encoder.
> +      */
> +     if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
> +             if (dssdev->ops && dssdev->ops->enable)
> +                     dssdev->ops->enable(dssdev);
> +             dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
> +     }
> +
>       /*
>        * Enable the chain of external devices, starting at the one at the
> -      * internal encoder's output. This is used for DSI outputs only, as
> -      * dssdev->next is NULL for all other outputs.
> +      * internal encoder's output.
>        */
>       omapdss_device_enable(dssdev->next);
>  }
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to