When there is a chain of bridges attached to the encoder,
the bus_format should be ideally set from the input format of the
first bridge in the chain.

Use the bridge state to get the negotiated bus_format.
If the bridge does not support format negotiation, error out
and fail.

Signed-off-by: Nikhil Devshatwar <nikhil...@ti.com>
---
 drivers/gpu/drm/tidss/tidss_encoder.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c 
b/drivers/gpu/drm/tidss/tidss_encoder.c
index e278a9c89476..ba5b6fccabe7 100644
--- a/drivers/gpu/drm/tidss/tidss_encoder.c
+++ b/drivers/gpu/drm/tidss/tidss_encoder.c
@@ -22,6 +22,7 @@ static int tidss_encoder_atomic_check(struct drm_encoder 
*encoder,
        struct drm_device *ddev = encoder->dev;
        struct tidss_crtc_state *tcrtc_state = to_tidss_crtc_state(crtc_state);
        struct drm_display_info *di = &conn_state->connector->display_info;
+       struct drm_bridge_state *bstate;
        struct drm_bridge *bridge;
        bool bus_flags_set = false;
 
@@ -41,17 +42,22 @@ static int tidss_encoder_atomic_check(struct drm_encoder 
*encoder,
                break;
        }
 
-       if (!di->bus_formats || di->num_bus_formats == 0)  {
-               dev_err(ddev->dev, "%s: No bus_formats in connected display\n",
-                       __func__);
-               return -EINVAL;
-       }
-
-       // XXX any cleaner way to set bus format and flags?
-       tcrtc_state->bus_format = di->bus_formats[0];
        if (!bus_flags_set)
                tcrtc_state->bus_flags = di->bus_flags;
 
+       /* Copy the bus_format from the input_bus_format of first bridge */
+       bridge = drm_bridge_chain_get_first_bridge(encoder);
+       bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge);
+       if (bstate)
+               tcrtc_state->bus_format = bstate->input_bus_cfg.format;
+
+       if (tcrtc_state->bus_format == 0 ||
+           tcrtc_state->bus_format == MEDIA_BUS_FMT_FIXED) {
+
+               dev_err(ddev->dev, "Bridge connected to the encoder did not 
specify media bus format\n");
+               return -EINVAL;
+       }
+
        return 0;
 }
 
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to