anx7625 requires 3 power supply regulators.
Signed-off-by: Hsin-Yi Wang <hsi...@chromium.org>
---
.../display/bridge/analogix,anx7625.yaml | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git
a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 60585a4fc22b..1aa08f10d894 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,18 @@ properties:
description: used for reset chip control, RESET_N pin B7.
maxItems: 1
+ vdd10-supply:
+ description: Regulator that provides the supply 1.0V power.
+ maxItems: 1
+
+ vdd18-supply:
+ description: Regulator that provides the supply 1.8V power.
+ maxItems: 1
+
+ vdd33-supply:
+ description: Regulator that provides the supply 3.3V power.
+ maxItems: 1
+
ports:
type: object
@@ -55,6 +67,9 @@ properties:
required:
- compatible
- reg
+ - vdd10-supply
+ - vdd18-supply
+ - vdd33-supply
- ports
additionalProperties: false
@@ -72,6 +87,9 @@ examples:
reg = <0x58>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;
ports {
#address-cells = <1>;
--
2.29.2.222.g5d2a92d10f8-goog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
