On 14:51-20201125, Tomi Valkeinen wrote: > Hi Nikhil, > > On 19/11/2020 18:01, Nikhil Devshatwar wrote: > > Remove the old code to iterate over the bridge chain, as this is > > already done by the framework. > > The bridge state should have the negotiated bus format and flags. > > Use these from the bridge's state. > > If the bridge does not support format negotiation, error out > > and fail. > > > > Signed-off-by: Nikhil Devshatwar <nikhil...@ti.com> > > Reviewed-by: Tomi Valkeinen <tomi.valkei...@ti.com> > > --- > > > > Notes: > > changes from v2: > > * Remove the old code and use the flags from the bridge state > > > > drivers/gpu/drm/tidss/tidss_encoder.c | 36 +++++++++++---------------- > > 1 file changed, 14 insertions(+), 22 deletions(-) > > If a first bridge (after the crtc) supports two bus formats as input, how > does tidss choose between > those? This patch just picks bstate->input_bus_cfg.format, and it's not clear > to me which one that > is (the first one?). Also, we don't check if tidss actually supports the bus > format.
The selection is done by the framework in select_bus_fmt_recursive at drivers/gpu/drm/drm_bridge.c:810 My understanding is that currently, the format negotiation logic does not negotiate all the way till encoder, it stops only at the first_bridge. Nikhil Devshatwar > > Tomi > > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
