The BSC controllers used for the HDMI DDC have an interrupt controller
shared between both instances. Let's add it to avoid polling.
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 4847dd305317..8bb46ae76a92 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -308,6 +308,14 @@ dvp: clock@7ef00000 {
#reset-cells = <1>;
};
+ bsc_intr: interrupt-controller@7ef00040 {
+ compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+ reg = <0x7ef00040 0x30>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
hdmi0: hdmi@7ef00700 {
compatible = "brcm,bcm2711-hdmi0";
reg = <0x7ef00700 0x300>,
@@ -341,6 +349,8 @@ ddc0: i2c@7ef04500 {
reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
+ interrupt-parent = <&bsc_intr>;
+ interrupts = <0>;
status = "disabled";
};
@@ -377,6 +387,8 @@ ddc1: i2c@7ef09500 {
reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
reg-names = "bsc", "auto-i2c";
clock-frequency = <97500>;
+ interrupt-parent = <&bsc_intr>;
+ interrupts = <1>;
status = "disabled";
};
};
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
