From: Dom Cobley <popcorn...@gmail.com>
Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).
This makes CEC unusable since our controller wouldn't have a physical
address anymore.
Set it back up again on the hotplug assert.
Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcorn...@gmail.com>
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 7945dbcee78c..c3a301396aad 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -136,20 +136,32 @@ static enum drm_connector_status
vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
{
struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
+ bool connected = false;
if (vc4_hdmi->hpd_gpio) {
if (gpio_get_value_cansleep(vc4_hdmi->hpd_gpio) ^
vc4_hdmi->hpd_active_low)
- return connector_status_connected;
- cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
- return connector_status_disconnected;
+ connected = true;
+ } else if (drm_probe_ddc(vc4_hdmi->ddc)) {
+ connected = true;
+ } else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
+ connected = true;
}
- if (drm_probe_ddc(vc4_hdmi->ddc))
- return connector_status_connected;
+ if (connected) {
+ if (connector->status != connector_status_connected) {
+ struct edid *edid = drm_get_edid(connector,
vc4_hdmi->ddc);
+
+ if (edid) {
+ cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap,
edid);
+ vc4_hdmi->encoder.hdmi_monitor =
drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ }
+ }
- if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED)
return connector_status_connected;
+ }
+
cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
return connector_status_disconnected;
}
--
2.29.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
