Hi Joel, > There are minor differences in the values for the threshold value and > the scan line size between families of ASPEED SoC. Additionally the > SCU register for the output control differs between families. > > This adds device tree matching to parameterise these values, allowing > us to add support for the AST2400 now, and in the future the AST2600.
Looks good to me. Two super minor things: > --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c > +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c > @@ -60,7 +60,8 @@ static void aspeed_gfx_enable_controller(struct > aspeed_gfx *priv) > u32 ctrl2 = readl(priv->base + CRT_CTRL2); > > /* SCU2C: set DAC source for display output to Graphics CRT (GFX) */ > - regmap_update_bits(priv->scu, 0x2c, BIT(16), BIT(16)); > + regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), BIT(16)); The comment references SCU2C; but you've implied that this will change... > @@ -228,7 +258,7 @@ static ssize_t dac_mux_store(struct device *dev, > struct device_attribute *attr, > if (val > 3) > return -EINVAL; > > - rc = regmap_update_bits(priv->scu, ASPEED_SCU_MISC_CTRL, 0x30000, val > << 16); > + rc = regmap_update_bits(priv->scu, priv->dac_reg, 0x30000, val << 16); > if (rc < 0) > return 0; > > @@ -241,7 +271,7 @@ static ssize_t dac_mux_show(struct device *dev, > struct device_attribute *attr, c > u32 reg; > int rc; > > - rc = regmap_read(priv->scu, ASPEED_SCU_MISC_CTRL, ®); > + rc = regmap_read(priv->scu, priv->dac_reg, ®); > if (rc) > return rc; You've removed the only uses of ASPEED_SCU_MISC_CTRL here, maybe drop the #define too? Regardless: Reviewed-by: Jeremy Kerr <j...@ozlabs.org> Cheers, Jeremy _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel