Update the panel to allow setting the rotation value in device tree.
Tested on an Odroid Go Advance, where the panel is by default rotated 270
degrees.
Signed-off-by: Chris Morgan <macromor...@hotmail.com>
---
drivers/gpu/drm/panel/panel-elida-kd35t133.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index bc36aa3c1123..d8534406d1ef 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -42,6 +42,7 @@ struct kd35t133 {
struct gpio_desc *reset_gpio;
struct regulator *vdd;
struct regulator *iovcc;
+ enum drm_panel_orientation orientation;
bool prepared;
};
@@ -216,6 +217,7 @@ static int kd35t133_get_modes(struct drm_panel *panel,
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
+ drm_connector_set_panel_orientation(connector, ctx->orientation);
return 1;
}
@@ -258,6 +260,12 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi)
return ret;
}
+ ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+ if (ret < 0) {
+ dev_err(dev, "%pOF: failed to get orientation %d\n",
dev->of_node, ret);
+ return ret;
+ }
+
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
