The BVB clock rate computation doesn't take into account a mode clock of
594MHz that we're going to need to support 4k60.
Acked-by: Thomas Zimmermann <tzimmerm...@suse.de>
Reviewed-by: Dave Stevenson <dave.steven...@raspberrypi.com>
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 9c919472ae84..c50dc5a59b2f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -91,7 +91,6 @@
# define VC4_HD_M_ENABLE BIT(0)
#define CEC_CLOCK_FREQ 40000
-#define VC4_HSM_MID_CLOCK 149985000
#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)
@@ -739,7 +738,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct
drm_encoder *encoder,
conn_state_to_vc4_hdmi_conn_state(conn_state);
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
- unsigned long pixel_rate, hsm_rate;
+ unsigned long bvb_rate, pixel_rate, hsm_rate;
int ret;
ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
@@ -793,12 +792,14 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct
drm_encoder *encoder,
vc4_hdmi_cec_update_clk_div(vc4_hdmi);
- /*
- * FIXME: When the pixel freq is 594MHz (4k60), this needs to be setup
- * at 300MHz.
- */
- ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock,
- (hsm_rate > VC4_HSM_MID_CLOCK ? 150000000 :
75000000));
+ if (pixel_rate > 297000000)
+ bvb_rate = 300000000;
+ else if (pixel_rate > 148500000)
+ bvb_rate = 150000000;
+ else
+ bvb_rate = 75000000;
+
+ ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
if (ret) {
DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
clk_disable_unprepare(vc4_hdmi->hsm_clock);
--
2.30.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
