Hi, On Tue, May 11, 2021 at 11:12 AM <rajee...@codeaurora.org> wrote: > > On 01-05-2021 03:08, Doug Anderson wrote: > > Hi, > > > > On Fri, Apr 30, 2021 at 8:10 AM <rajee...@codeaurora.org> wrote: > >> > >> On 30-04-2021 02:33, Doug Anderson wrote: > >> > Hi, > >> > > >> > On Thu, Apr 29, 2021 at 11:04 AM Rob Herring <r...@kernel.org> wrote: > >> >> > >> >> On Mon, Apr 26, 2021 at 11:29:15AM +0530, Rajeev Nandan wrote: > >> >> > Add bindings for DisplayPort aux backlight driver. > >> >> > > >> >> > Changes in v2: > >> >> > - New > >> >> > > >> >> > Signed-off-by: Rajeev Nandan <rajee...@codeaurora.org> > >> >> > --- > >> >> > .../bindings/leds/backlight/dp-aux-backlight.yaml | 49 > >> >> > ++++++++++++++++++++++ > >> >> > 1 file changed, 49 insertions(+) > >> >> > create mode 100644 > >> >> > Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml > >> >> > > >> >> > diff --git > >> >> > a/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml > >> >> > > >> >> > b/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml > >> >> > new file mode 100644 > >> >> > index 00000000..0fa8bf0 > >> >> > --- /dev/null > >> >> > +++ > >> >> > b/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml > >> >> > @@ -0,0 +1,49 @@ > >> >> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >> >> > +%YAML 1.2 > >> >> > +--- > >> >> > +$id: > >> >> > http://devicetree.org/schemas/leds/backlight/dp-aux-backlight.yaml# > >> >> > +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> >> > + > >> >> > +title: DisplayPort aux backlight driver bindings > >> >> > + > >> >> > +maintainers: > >> >> > + - Rajeev Nandan <rajee...@codeaurora.org> > >> >> > + > >> >> > +description: > >> >> > + Backlight driver to control the brightness over DisplayPort aux > >> >> > channel. > >> >> > + > >> >> > +allOf: > >> >> > + - $ref: common.yaml# > >> >> > + > >> >> > +properties: > >> >> > + compatible: > >> >> > + const: dp-aux-backlight > >> >> > + > >> >> > + ddc-i2c-bus: > >> >> > + $ref: /schemas/types.yaml#/definitions/phandle > >> >> > + description: > >> >> > + A phandle to the system I2C controller connected to the DDC > >> >> > bus used > >> >> > + for the DisplayPort AUX channel. > >> >> > + > >> >> > + enable-gpios: > >> >> > + maxItems: 1 > >> >> > + description: GPIO specifier for backlight enable pin. > >> >> > + > >> >> > + max-brightness: true > >> >> > + > >> >> > +required: > >> >> > + - compatible > >> >> > + - ddc-i2c-bus > >> >> > + > >> >> > +additionalProperties: false > >> >> > + > >> >> > +examples: > >> >> > + - | > >> >> > + backlight { > >> >> > + compatible = "dp-aux-backlight"; > >> >> > + ddc-i2c-bus = <&sn65dsi86_bridge>; > >> >> > + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; > >> >> > >> >> So the DDC bus is connected to a backlight and also a panel? This > >> >> binding is not reflecting the h/w, but rather what you want for some > >> >> driver. > >> >> > >> >> There's only one thing here and that's an eDP panel which supports > >> >> backlight control via DP aux channel. You can figure all that out from > >> >> the panel's compatible and/or reading the EDID. > >> >> > >> >> You might also be interested in this thread: > >> >> > >> >> https://lore.kernel.org/lkml/yiksdtjcihgnv...@orome.fritz.box/ > >> > > >> > I think Rajeev needs to rework everything anyway as per: > >> > > >> > https://lore.kernel.org/r/87zgxl5qar....@intel.com > >> > > >> > ...but you're right that it makes sense not to model the backlight as > >> > a separate node in the device tree. The panel driver can handle > >> > setting up the backlight. > >> > > >> > -Doug > >> > >> It was not a good idea to create a separate backlight driver and use > >> ddc-i2c-bus to get access to DP aux. I am working to move the code > >> to the panel driver and to utilize the new DRM helper functions > >> (drm_edp_backlight_*) Lyude has added [1]. > >> > >> To use these helper functions, the panel driver should have access to > >> the > >> "struct drm_dp_aux *". The simple-panel has a "ddc-i2c-bus" property > >> to give the panel access to the DDC bus and is currently being used to > >> get the EDID from the panel. Can I use the same ddc bus i2c_adapter to > >> get > >> the "struct drm_dp_aux *"? > >> > >> As per the suggestion [2], I get the "struct drm_dp_aux *" from the > >> i2c_adapter of ddc bus (maybe I didn't understand the suggestion > >> correctly), > >> and, it turned out, the way I have implemented is not the right way > >> [3]. > >> So, I am afraid to use the same method in the panel driver. > >> > >> > >> [1] https://lore.kernel.org/dri-devel/871rb5bcf9....@intel.com/ > >> [2] https://www.spinics.net/lists/dri-devel/msg295429.html > >> [3] > >> https://lore.kernel.org/dri-devel/20210426111116.4lc3ekxjugjr3...@maple.lan/ > > > > So it's definitely up to maintainers, not me. ...but I guess I would > > have expected something like a new property called "ddc-aux-bus". Then > > you'd have to create a new API call called something like > > "of_find_ddc_aux_adapter_by_node()" that would allow you to find it. > > > > To implement the first suggestion, I can think of the following way > to get the "struct drm_dp_aux" in the panel_simple_probe function: > > - Create a new panel-simple DT property "ddc-aux-bus", a phandle to the > platform device that implements the AUX channel. > > - Create a global list of drm_dp_aux in drm_dp_helper.c. Initialize list > head > in drm_dp_aux_init(), add the drm_dp_aux onto the list in > drm_dp_aux_register(). > Similarly, remove the drm_dp_aux from list in drm_dp_aux_unregister(). > > - Create a new function of_drm_find_dp_aux_by_node() to get the expected > drm_dp_aux from this global list. > > Please let me know your views on this implementation.
BTW: a bunch of discussion today on IRC: https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&highlight_names=&date=2021-05-11&show_html=true -Doug
