Hi Rajeev
On Sat, Jun 19, 2021 at 04:10:30PM +0530, Rajeev Nandan wrote:
> Add Samsung 13.3" FHD eDP AMOLED panel.
> 
> Signed-off-by: Rajeev Nandan <rajee...@codeaurora.org>
> Reviewed-by: Douglas Anderson <diand...@chromium.org>
> ---
> 
> Changes in v4:
> - New
> 
> Changes in v5:
> - Remove "uses_dpcd_backlight" property, not required now. (Douglas)
> 
> Changes in v7:
> - Update disable_to_power_off and power_to_enable delays. (Douglas)
> 
>  drivers/gpu/drm/panel/panel-simple.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c 
> b/drivers/gpu/drm/panel/panel-simple.c
> index 86e5a45..4adc44a 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -3562,6 +3562,36 @@ static const struct panel_desc rocktech_rk101ii01d_ct 
> = {
>       .connector_type = DRM_MODE_CONNECTOR_LVDS,
>  };
>  
> +static const struct drm_display_mode samsung_atna33xc20_mode = {
> +     .clock = 138770,
> +     .hdisplay = 1920,
> +     .hsync_start = 1920 + 48,
> +     .hsync_end = 1920 + 48 + 32,
> +     .htotal = 1920 + 48 + 32 + 80,
> +     .vdisplay = 1080,
> +     .vsync_start = 1080 + 8,
> +     .vsync_end = 1080 + 8 + 8,
> +     .vtotal = 1080 + 8 + 8 + 16,
> +     .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static const struct panel_desc samsung_atna33xc20 = {
> +     .modes = &samsung_atna33xc20_mode,
> +     .num_modes = 1,
> +     .bpc = 10,
> +     .size = {
> +             .width = 294,
> +             .height = 165,
> +     },
> +     .delay = {
> +             .disable_to_power_off = 200,
> +             .power_to_enable = 400,
> +             .hpd_absent_delay = 200,
> +             .unprepare = 500,
> +     },
> +     .connector_type = DRM_MODE_CONNECTOR_eDP,
> +};

bus_format is missing. There should be a warning about this when you
probe the display.

The bpc of 10 in unusual, the current code warns if bpc is neither 6 nor
8. If 10 is correct then update the code to accept bpc=10.

        Sam

> +
>  static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
>       .clock = 271560,
>       .hdisplay = 2560,
> @@ -4563,6 +4593,9 @@ static const struct of_device_id platform_of_match[] = {
>               .compatible = "rocktech,rk101ii01d-ct",
>               .data = &rocktech_rk101ii01d_ct,
>       }, {
> +             .compatible = "samsung,atna33xc20",
> +             .data = &samsung_atna33xc20,
> +     }, {
>               .compatible = "samsung,lsn122dl01-c01",
>               .data = &samsung_lsn122dl01_c01,
>       }, {
> -- 
> 2.7.4

Reply via email to