This creates a macro wrapping mipi_dbi_command() such that we get some explicit error reporting if something goes wrong.
Cc: Noralf Trønnes <nor...@tronnes.org> Suggested-by: Douglas Anderson <diand...@chromium.org> Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- drivers/gpu/drm/panel/panel-samsung-db7430.c | 66 +++++++++++--------- 1 file changed, 36 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-samsung-db7430.c b/drivers/gpu/drm/panel/panel-samsung-db7430.c index fe58263bd9cd..c42d43ab6a4f 100644 --- a/drivers/gpu/drm/panel/panel-samsung-db7430.c +++ b/drivers/gpu/drm/panel/panel-samsung-db7430.c @@ -90,9 +90,17 @@ static inline struct db7430 *to_db7430(struct drm_panel *panel) return container_of(panel, struct db7430, panel); } +#define db7430_command(db, cmd, seq...) \ +({ \ + struct mipi_dbi *dbi = &db->dbi; \ + int ret; \ + ret = mipi_dbi_command(dbi, cmd, seq); \ + if (ret) \ + dev_err(db->dev, "failure in writing command %#02x\n", cmd); \ +}) + static int db7430_power_on(struct db7430 *db) { - struct mipi_dbi *dbi = &db->dbi; int ret; /* Power up */ @@ -119,48 +127,48 @@ static int db7430_power_on(struct db7430 *db) * normal output behaviour is horizontally flipped and BGR ordered. Do * it twice because the first message doesn't always "take". */ - mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); - mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); - mipi_dbi_command(dbi, DB7430_ACCESS_PROT_OFF, 0x00); - mipi_dbi_command(dbi, DB7430_PANEL_DRIVING, 0x28, 0x08); - mipi_dbi_command(dbi, DB7430_SOURCE_CONTROL, + db7430_command(db, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); + db7430_command(db, MIPI_DCS_SET_ADDRESS_MODE, 0x0a); + db7430_command(db, DB7430_ACCESS_PROT_OFF, 0x00); + db7430_command(db, DB7430_PANEL_DRIVING, 0x28, 0x08); + db7430_command(db, DB7430_SOURCE_CONTROL, 0x01, 0x30, 0x15, 0x05, 0x22); - mipi_dbi_command(dbi, DB7430_GATE_INTERFACE, + db7430_command(db, DB7430_GATE_INTERFACE, 0x10, 0x01, 0x00); - mipi_dbi_command(dbi, DB7430_DISPLAY_H_TIMING, + db7430_command(db, DB7430_DISPLAY_H_TIMING, 0x06, 0x55, 0x03, 0x07, 0x0b, 0x33, 0x00, 0x01, 0x03); /* * 0x00 in datasheet 0x01 in vendor code 0x00, it seems 0x01 means * DE active high and 0x00 means DE active low. */ - mipi_dbi_command(dbi, DB7430_RGB_SYNC_OPTION, 0x01); - mipi_dbi_command(dbi, DB7430_GAMMA_SET_RED, + db7430_command(db, DB7430_RGB_SYNC_OPTION, 0x01); + db7430_command(db, DB7430_GAMMA_SET_RED, /* R positive gamma */ 0x00, 0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62, 0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08, /* R negative gamma */ 0x00, 0x0A, 0x31, 0x3B, 0x4E, 0x58, 0x59, 0x5B, 0x58, 0x5E, 0x62, 0x60, 0x61, 0x5E, 0x62, 0x55, 0x55, 0x7F, 0x08); - mipi_dbi_command(dbi, DB7430_GAMMA_SET_GREEN, + db7430_command(db, DB7430_GAMMA_SET_GREEN, /* G positive gamma */ 0x00, 0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59, 0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A, /* G negative gamma */ 0x00, 0x25, 0x15, 0x28, 0x3D, 0x4A, 0x48, 0x4C, 0x4A, 0x52, 0x59, 0x59, 0x5B, 0x56, 0x60, 0x5D, 0x55, 0x7F, 0x0A); - mipi_dbi_command(dbi, DB7430_GAMMA_SET_BLUE, + db7430_command(db, DB7430_GAMMA_SET_BLUE, /* B positive gamma */ 0x00, 0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D, 0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C, /* B negative gamma */ 0x00, 0x48, 0x10, 0x1F, 0x2F, 0x35, 0x38, 0x3D, 0x3C, 0x45, 0x4D, 0x4E, 0x52, 0x51, 0x60, 0x7F, 0x7E, 0x7F, 0x0C); - mipi_dbi_command(dbi, DB7430_BIAS_CURRENT_CTRL, 0x33, 0x13); - mipi_dbi_command(dbi, DB7430_DDV_CTRL, 0x11, 0x00, 0x00); - mipi_dbi_command(dbi, DB7430_GAMMA_CTRL_REF, 0x50, 0x50); - mipi_dbi_command(dbi, DB7430_DCDC_CTRL, 0x2f, 0x11, 0x1e, 0x46); - mipi_dbi_command(dbi, DB7430_VCL_CTRL, 0x11, 0x0a); + db7430_command(db, DB7430_BIAS_CURRENT_CTRL, 0x33, 0x13); + db7430_command(db, DB7430_DDV_CTRL, 0x11, 0x00, 0x00); + db7430_command(db, DB7430_GAMMA_CTRL_REF, 0x50, 0x50); + db7430_command(db, DB7430_DCDC_CTRL, 0x2f, 0x11, 0x1e, 0x46); + db7430_command(db, DB7430_VCL_CTRL, 0x11, 0x0a); return 0; } @@ -181,11 +189,10 @@ static int db7430_unprepare(struct drm_panel *panel) static int db7430_disable(struct drm_panel *panel) { struct db7430 *db = to_db7430(panel); - struct mipi_dbi *dbi = &db->dbi; - mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + db7430_command(db, MIPI_DCS_SET_DISPLAY_OFF); msleep(25); - mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE); + db7430_command(db, MIPI_DCS_ENTER_SLEEP_MODE); msleep(120); return 0; @@ -199,26 +206,25 @@ static int db7430_prepare(struct drm_panel *panel) static int db7430_enable(struct drm_panel *panel) { struct db7430 *db = to_db7430(panel); - struct mipi_dbi *dbi = &db->dbi; /* Exit sleep mode */ - mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + db7430_command(db, MIPI_DCS_EXIT_SLEEP_MODE); msleep(20); /* NVM (non-volatile memory) load sequence */ - mipi_dbi_command(dbi, DB7430_UNKNOWN_D4, 0x52, 0x5e); - mipi_dbi_command(dbi, DB7430_UNKNOWN_F8, 0x01, 0xf5, 0xf2, 0x71, 0x44); - mipi_dbi_command(dbi, DB7430_UNKNOWN_FC, 0x00, 0x08); + db7430_command(db, DB7430_UNKNOWN_D4, 0x52, 0x5e); + db7430_command(db, DB7430_UNKNOWN_F8, 0x01, 0xf5, 0xf2, 0x71, 0x44); + db7430_command(db, DB7430_UNKNOWN_FC, 0x00, 0x08); msleep(150); /* CABC turn on sequence (BC = backlight control) */ - mipi_dbi_command(dbi, DB7430_UNKNOWN_B4, 0x0f, 0x00, 0x50); - mipi_dbi_command(dbi, DB7430_USER_SELECT, 0x80); - mipi_dbi_command(dbi, DB7430_UNKNOWN_B7, 0x24); - mipi_dbi_command(dbi, DB7430_UNKNOWN_B8, 0x01); + db7430_command(db, DB7430_UNKNOWN_B4, 0x0f, 0x00, 0x50); + db7430_command(db, DB7430_USER_SELECT, 0x80); + db7430_command(db, DB7430_UNKNOWN_B7, 0x24); + db7430_command(db, DB7430_UNKNOWN_B8, 0x01); /* Turn on display */ - mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + db7430_command(db, MIPI_DCS_SET_DISPLAY_ON); return 0; } -- 2.31.1