Hi Sam,
On Mon, Jul 19, 2021 at 9:23 PM Sam Ravnborg <s...@ravnborg.org> wrote:
> On Wed, Jul 14, 2021 at 04:57:59PM +0200, Geert Uytterhoeven wrote:
> > This patch series optimizes console operations on ssd1307fb, after the
> > customary fixes and cleanups.
> >
> > Currently, each screen update triggers an I2C transfer of all screen
> > data, up to 1 KiB of data for a 128x64 display, which takes at least 20
> > ms in Fast mode. While many displays are smaller, and thus require less
> > data to be transferred, 20 ms is still an optimistic value, as the
> > actual data transfer may be much slower, especially on bitbanged I2C
> > drivers. After this series, the amount of data transfer is reduced, as
> > fillrect, copyarea, and imageblit only update the rectangle that
> > changed.
> >
> > This has been tested on an Adafruit FeatherWing OLED with an SSD1306
> > controller and a 128x32 OLED, connected to an OrangeCrab ECP5 FPGA board
> > running a 64 MHz VexRiscv RISC-V softcore, where it reduced the CPU
> > usage for blinking the cursor from more than 70% to ca. 10%.
> >
> > Thanks for your comments!
> >
> > Geert Uytterhoeven (5):
> > video: fbdev: ssd1307fb: Propagate errors via
> > ssd1307fb_update_display()
> > video: fbdev: ssd1307fb: Simplify ssd1307fb_update_display()
> > video: fbdev: ssd1307fb: Extract ssd1307fb_set_address_range()
> > video: fbdev: ssd1307fb: Optimize screen updates
> > video: fbdev: ssd1307fb: Cache address ranges
>
> A few comments left for a couple of patches.
> The remaining patches are:
> Acked-by: Sam Ravnborg <s...@ravnborg.org>
Thank you!
> Do you have commit rights to drm-misc-next?
No I have not (and I don't think I should).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
